Nuie Arno Vanity & Basin - Wall Hung, 2 Door, 600mm, Satin Grey

Not Available Nuie Arno Vanity & Basin - Wall Hung, 2 Door, 600mm, Satin Grey

The Nuie Arno 600mm wall hung vanity unit with curved ceramic basin offers a space-saving and styl...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Nuie Arno 600mm wall-hung vanity unit with a curved ceramic basin is designed for modern bathrooms seeking a space-saving, stylish, and functional storage solution. Its key benefit is enhancing room perception through its floating design while offering practical storage behind soft-close doors. A potential consideration is that the basin tap and waste are sold separately. This unit features a moisture-resistant Satin Grey finish, a durable MDF construction, and comes fully assembled with elegant chrome D-shape handles.

All features

Colour	Grey
Model Part Number	ARN2223G
Brand	Nuie

Extended Product Information

FAQs

Is the basin tap included with the vanity unit?

No, the basin tap and waste are sold separately. You will need to purchase these items in addition to the vanity unit and basin.

What type of tap should I use with this basin?

The basin features a single pre-drilled tap hole, making it compatible with a standard mono basin mixer tap.

How do I clean the Satin Grey finish?

Clean the finish with a soft, damp cloth and mild detergent. Avoid abrasive cleaners to prevent scratching. Dry thoroughly after cleaning.

Does the unit come assembled?

Yes, the Nuie Arno vanity unit is supplied fully assembled and rigid, ready for installation.

What is the warranty period for this vanity unit?

This Nuie Arno vanity unit comes with a 5-year guarantee from the manufacturer.

Can I install this unit myself?

The unit is fully assembled, but wall mounting requires appropriate tools and knowledge of secure wall fixing. If you are not experienced with DIY, professional installation is recommended.

What are the dimensions of the vanity unit and basin?

The vanity unit dimensions are approximately H:56.9 x W:61.0 x D:44.0 cm. The basin dimensions are approximately W:610mm x H:160mm x D:440mm.

Troubleshooting

Doors not closing smoothly or are sticking.

Check for any obstructions preventing the doors from closing. Ensure the 95-degree hinges are properly aligned and not damaged. Gently adjust the hinge screws if necessary, following the manufacturer's guidance for hinge adjustment.

Water pooling in the basin after use.

Ensure the basin waste is correctly installed and not blocked. Check that the drain is clear of any hair or debris. Verify that the basin has a slight slope towards the waste outlet.

Unit appears unstable on the wall.

The unit may not be securely fixed. Re-check the wall fixings and ensure they are appropriate for your wall type and securely tightened. Consult a professional if you are unsure about wall mounting.

Surface finish appears dull or stained.

Clean the unit with a mild detergent and a soft cloth. Avoid harsh chemicals or abrasive cleaners. For stubborn stains, a specialist bathroom cleaner may be used cautiously, following its instructions.

Pros and Cons

Pros

Space-saving wall-hung design enhances room aesthetics.
Soft-close doors provide quiet and smooth operation.
Durable, moisture-resistant finish suitable for bathrooms.
Comes fully assembled for straightforward installation.
Elegant Satin Grey finish complements modern interiors.
Generous storage capacity behind two doors.

Cons

Basin tap and waste are sold separately.
Requires wall-mounting, necessitating appropriate fixings (not included).
Limited to one tap hole, restricting tap choices.
The 600mm width might be too large for very small cloakroom spaces.

Setup, Compatibility & Care

Setup: The Nuie Arno vanity unit is supplied fully assembled, which simplifies the installation process. However, appropriate wall fixings suitable for your wall type (e.g., plasterboard, brick) must be purchased separately and used to securely mount the unit. Ensure the unit is level before fixing. The basin comes with a pre-drilled tap hole, ready for a standard mono basin mixer tap (sold separately). Waste fittings are also sold separately.

Compatibility: This unit is designed for use with standard bathroom taps and waste kits. Ensure any chosen tap is compatible with a single tap hole basin. The dimensions are H:56.9 x W:61.0 x D:44.0 cm (unit), with the basin being W:610mm x H:160mm x D:440mm. Always check these dimensions against your available space.

Care: To maintain the Satin Grey finish and the vitreous china basin, clean regularly with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can scratch the surfaces. For tougher marks, use a mild detergent. Wipe dry after cleaning to prevent water spots. Ensure any spills are wiped up promptly, especially around the basin edges and door seals.