Blue Magic Quiksteel Xtreme High Temperature Fast Repair Epoxy Putty Weld Filler - Blue - 18003
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a durable, high-temperature repair solution. Blue Magic Quiksteel Xtreme is ideal for repairing furnaces, BBQs, and other items exposed to extreme heat. A key benefit is its ability to withstand temperatures up to 1316°C. Keep in mind that while it's easy to use, proper surface preparation is crucial for optimal results.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 18003 |
| Brand | Blue Magic |
Extended Product Information
FAQs
What is the maximum temperature this product can withstand?
Blue Magic Quiksteel Xtreme can withstand temperatures up to 1316°C.
Can I use this on a car exhaust?
Yes, it can be used on exhaust systems, provided the exhaust temperature doesn't exceed 1316°C.
How long does it take to cure?
Curing time varies depending on temperature. Refer to the product packaging for specific curing times.
What surfaces can I use this on?
It is compatible with metals and other high-heat materials. Always test in an inconspicuous area first to ensure compatibility.
Do I need any special tools to apply this?
No, the putty is easy to apply by hand. However, you may need tools like a wire brush or sandpaper for surface preparation.
Is it waterproof?
Yes, once cured, it is waterproof.
Can it be painted?
Yes, once fully cured, it can be painted to match the surrounding surface.
What is the shelf life of this product?
Check the product packaging for the expiration date to ensure optimal performance.
Troubleshooting
Putty is not hardening.
Ensure the putty was mixed thoroughly. Check the expiration date. Apply in appropriate temperature conditions.
Poor adhesion to the surface.
Make sure the surface is clean, dry, and roughened before applying the putty. Ensure proper mixing and application.
Cracking after curing.
Ensure the putty has fully cured. Avoid applying too thick of a layer in one go, apply in multiple thinner layers.
Pros and Cons
Pros
- High-temperature resistance up to 1316°C.
- Suitable for direct flame exposure.
- Effective for filling cracks, holes, and pits.
- Strength increases with heat.
- Easy application process.
- Resistant to rust and oxidation.
Cons
- Requires proper surface preparation for optimal adhesion.
- May not be suitable for all types of materials.
- Curing time may vary depending on temperature.
- Not intended for structural repairs.
- Limited working time after mixing.
Setup, Compatibility & Care
- Preparation: Ensure the surface to be repaired is clean, dry, and free from loose debris, rust, and grease. Use a wire brush or sandpaper to roughen the surface for better adhesion.
- Mixing: Cut off the required amount of Quiksteel Xtreme. Knead the putty thoroughly until it becomes a uniform color.
- Application: Apply the mixed putty firmly into the crack, hole, or damaged area. Press firmly to ensure it fills the gap completely.
- Curing: Allow the putty to cure completely. The curing time will vary depending on the temperature. Higher temperatures will speed up the curing process. Refer to the product packaging for specific curing times.
- Compatibility: This product is compatible with metals and other high-heat materials. Always test in an inconspicuous area first to ensure compatibility. Avoid use on materials not rated for high temperatures.
- Care: Once cured, the repair is durable and requires minimal care. Avoid subjecting the repaired area to excessive stress or impact. Clean with a damp cloth; do not use harsh chemicals.