Rust-Oleum Garden Paint - All Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you get the most out of Rust-Oleum All Green garden paint. Ideal for refreshing outdoor surfaces like brick, concrete, and wood, this paint offers a long-lasting, matt finish. However, achieving the best results requires proper surface preparation and multiple coats.
All features
| Colour | Green |
|---|---|
| Brand | Rust-Oleum |
Extended Product Information
FAQs
How much area does a 125ml can cover?
A 125ml can cover up to 1.75 m² on average.
How many coats of paint are needed?
It is recommended to apply two coats for the best results.
What surfaces can I use this paint on?
This paint is suitable for use on brick, concrete, plaster, stone, and wood surfaces.
How long should I wait before recoating?
You can recoat after just 2 hours.
Is this paint water-based?
Yes, it is a water-based paint, making it safe for you and your home.
Is the paint resistant to mould and water?
Yes, it is resistant to mould and water, making it ideal for outdoor use.
How do I clean the paint brushes and rollers after use?
Clean tools with water immediately after use.
Troubleshooting
Paint is not adhering to the surface.
Ensure the surface is properly prepared by cleaning, removing loose debris, and allowing it to dry. Lightly sand glossy surfaces to improve adhesion.
Uneven finish or streaks after application.
Apply the paint in even strokes and avoid overloading the brush or roller. Apply a second coat to ensure an even finish.
Paint takes longer than 2 hours to dry.
Ensure good ventilation. If the temperature is too low or the humidity is too high, drying times may be extended.
Pros and Cons
Pros
- Suitable for a wide range of outdoor surfaces.
- Provides a durable and attractive matt finish.
- Quick drying time allows for faster project completion.
- Water-based formula is safer and easier to clean.
- Resistant to mould and water, making it ideal for outdoor use.
Cons
- Requires two coats for optimal results.
- Coverage is limited to 1.75 m² per 125ml.
- Surface preparation is essential for proper adhesion.
- May require more than one can for larger areas.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is dry, dust-free, and grease-free before application. Clean the surface thoroughly.
- Application: Use a brush or roller to apply an even layer. Two coats are recommended for the best results.
- Drying Time: Allow 2 hours of drying time before recoating.
- Compatibility: Suitable for brick, concrete, plaster, stone, and wood surfaces.
- Care: Clean tools with water after use. Store the paint in a cool, dry place and keep it away from direct sunlight.