Dulux One Coat Pure Brilliant White Gloss Paint - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Dulux One Coat Gloss Pure Brilliant White is designed for DIY enthusiasts and homeowners seeking a quick and efficient way to achieve a high-gloss finish on interior wood and metal surfaces. Its key benefit is the single-coat application, saving time and effort. A caveat to consider is its interior-use only formulation. This water-based paint offers a durable, non-drip finish, eliminating the need for an undercoat on previously prepared surfaces.
All features
| Colour | White |
|---|---|
| Brand | Dulux |
Extended Product Information
FAQs
Can I use this paint on exterior surfaces?
No, Dulux One Coat Gloss is formulated for interior use only.
Do I need to use an undercoat?
No undercoat is required if the surface is already primed or painted. For bare, unprimed surfaces, a suitable primer should be used first.
How long does it take to dry?
The paint is touch dry in up to 2 hours. Re-coating times are not applicable as it is designed for one coat.
What surfaces can I apply this paint to?
It is suitable for interior wood and metal surfaces that are previously primed or painted.
How do I clean my brushes after use?
Clean all application tools immediately after use with water.
What is the best way to apply the paint for a smooth finish?
Stir the paint thoroughly and apply evenly with a good quality brush or roller. Avoid over-spreading the paint.
Can I use this on radiators?
This product is not specifically designed for radiators and may not withstand high temperatures. Check the product packaging for specific radiator suitability.
Troubleshooting
Paint is too thick or streaky
Ensure the paint has been thoroughly stirred. If necessary, thin slightly with a small amount of water (max 10%). Ensure application tools are suitable and not worn.
Poor coverage on the first coat
While designed for one coat, heavily stained or very porous surfaces may benefit from a second coat or a suitable primer. Ensure the paint was applied evenly and not spread too thinly.
Surface remains tacky after extended drying
This can occur in very humid or cold conditions. Ensure the room is well-ventilated and within the recommended temperature range (typically 10-25°C). Avoid applying thick coats in damp conditions.
Pros and Cons
Pros
- Saves time with single-coat coverage.
- Easy to clean up using water.
- Reduced mess due to non-drip formula.
- No need for a separate undercoat saves on materials and time.
- Provides a bright, durable white gloss finish.
Cons
- Strictly for interior use.
- Requires surfaces to be previously primed or painted for direct application.
- May require careful surface preparation for optimal results.
- Drying times can vary based on environmental conditions.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. This paint is suitable for direct application to previously primed or painted wood and metal. For bare, unprimed surfaces, a suitable primer should be applied first.
Application: Stir the paint thoroughly before use. Apply using a brush or roller. Avoid over-thinning. Apply one coat for optimal coverage.
Compatibility: Suitable for interior wood and metal.
Care: Clean brushes and equipment immediately after use with water. Store paint in a cool, dry place away from direct sunlight. Ensure the lid is tightly sealed.