Dulux Trade Quick Dry Satinwood Tinted Colour Match - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Dulux Trade Quick Dry Satinwood is designed for professional decorators and DIY enthusiasts looking for a high-quality, water-based finish for interior wood and metal surfaces. Its key benefit is providing a smooth, durable satin coat that dries quickly, minimizing downtime. A primary consideration is that tinted colours are mixed to order and cannot be returned. This paint offers an excellent satin finish, advanced water-based technology, and a tough, durable result, suitable for various interior rooms including kitchens and bathrooms.
All features
| Model Part Number | 5220127 |
|---|---|
| Brand | Dulux Trade |
Extended Product Information
FAQs
Can I use Dulux Trade Quick Dry Satinwood on exterior surfaces?
No, this product is specifically designed for interior use only and is not suitable for exterior applications.
How long does it take to dry?
The drying time is approximately 6 hours, but this can vary depending on temperature and humidity levels. Recoating is possible after a minimum of 4 hours.
What surfaces can I paint with this product?
It is suitable for interior wood, metal, and MDF surfaces.
How do I clean my brushes after use?
After use, remove as much excess paint as possible from your tools and then clean them thoroughly with water.
Can I thin this paint?
Thinning is not usually necessary. However, if required, you can add up to 1 part clean water to 20 parts paint.
What is the coverage rate?
The surface coverage is approximately 12 square meters per liter, applied at the recommended thickness.
What should I do if I have leftover paint?
Please dispose of leftover paint responsibly. You can ask your stockist about recycling options for paint containers. Visit duluxtrade.co.uk/pp for more information on sustainability.
Can tinted colours be returned?
No, this product is tinted to order and therefore cannot be returned or exchanged.
Troubleshooting
Uneven finish or brush marks visible
Ensure the paint is thoroughly stirred. Use a good quality synthetic brush designed for water-based paints. Apply paint evenly and avoid overworking it. Ensure the surface is smooth and properly prepared.
Paint not adhering well
Verify that the surface is clean, dry, and free from dust, grease, or flaking paint. Ensure appropriate primers have been used, especially on new or previously treated surfaces.
Slow drying time
Drying times are affected by temperature and humidity. Ensure application is in a well-ventilated area and within the recommended temperature range. Avoid application in very humid or cold conditions.
Colour does not match expectation
Tinted colours are mixed to order. For best results, ensure the correct colour base and tinting formula were used. As tinted products cannot be returned, always test a small area if unsure.
Pros and Cons
Pros
- Provides a smooth, attractive satin finish.
- Water-based formulation allows for quick drying and easy cleanup.
- Durable finish suitable for various interior applications.
- Can be applied with brushes, rollers, or sprayers.
- Suitable for both wood and metal surfaces.
Cons
- Tinted colours are made to order and cannot be returned.
- Requires specific preparation for best results, especially on new surfaces.
- Drying time is dependent on temperature and humidity.
- Not suitable for outdoor use.
Setup, Compatibility & Care
Surface Preparation: Ensure all surfaces to be painted are sound, clean, and dry. New surfaces, in particular, must be fully dry. For existing painted surfaces, ensure they are free from contaminants. If painting over old lead paints, consult relevant health and safety information. For best adhesion and finish, it is recommended to use a coat of Dulux Trade Quick Dry Undercoat, especially when making a strong colour change or coating factory-primed surfaces.
Application: Stir thoroughly before use. Apply by good quality synthetic (nylon polyester) brush, roller, or spray. Thinning is generally not necessary; however, if required, add up to 1 part clean water to 20 parts paint.
Coats: Two full coats are typically recommended for optimal coverage and durability.
Drying & Recoating: Allow a minimum of 4 hours and a maximum of 6 hours between coats, dependent on ambient temperature and humidity.
Tool Cleaning: After use, remove as much paint as possible from brushes, rollers, and spray equipment before cleaning thoroughly with water.
Storage: Do not use or store in extreme temperatures, and protect from frost. Ensure containers are tightly sealed when not in use.
Compatibility: Suitable for use on MDF, metal, and wood. Not suitable for outdoor use.