Shopping.co.uk

U-POL Davids ISOPON P38 Easy Sand Car Body Filler Repairs Scratch Repair - 250ML

Not AvailableU-POL Davids ISOPON P38 Easy Sand Car Body Filler Repairs Scratch Repair - 250ML
Not Available

U-Pol P.38 Multi-Purpose Body Filler Tin 250ml ISOPON P.38 Multi-Purpose Body Filler is a durable ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to repair minor dents and scratches on their vehicle's bodywork using U-POL P.38 Multi-Purpose Body Filler. The key benefit is its ease of use and durability, making it ideal for both DIY enthusiasts and professionals. A potential caveat is the need for proper surface preparation for optimal results. This guide will provide information on the product, its features, how to use it, and tips for best results.

All features

Model Part NumberP38/S
BrandU-POL

Extended Product Information

FAQs

How much filler do I need?

The amount needed depends on the size and depth of the damage. A 250ml tin is generally sufficient for minor repairs.

What kind of sandpaper should I use?

Start with a coarser grit (e.g., 80 grit) for shaping, and move to finer grits (e.g., 180, 240, 320) for smoothing.

Can I use this on plastic?

Not directly. You will need to use an adhesion promoter specifically designed for plastic before applying the filler.

How long does it take to dry?

Drying time is typically 20-30 minutes at room temperature, but this can vary depending on conditions. Check the instructions for precise guidelines.

Do I need to prime after sanding?

Yes, priming is recommended after sanding to create a good base for the topcoat (paint).

How do I store the remaining filler?

Seal the tin tightly and store it in a cool, dry place. The filler may harden over time, especially if exposed to air.

Can I use this filler on my car's roof?

Yes, provided the roof material is metal, fiberglass, or wood and you follow the preparation instructions.

Troubleshooting

Filler is not hardening.

Ensure the correct ratio of hardener is mixed with the filler. Check the expiration date of both the filler and hardener.

Filler is difficult to sand.

Allow the filler to fully cure before sanding. Use appropriate grit sandpaper.

Filler is shrinking after application.

Apply the filler in thin layers and allow each layer to dry completely before sanding. Avoid applying too much filler in one go.

Filler not adhering to surface.

Ensure the surface is clean, degreased, and properly sanded before applying the filler. Use a suitable primer for optimal adhesion.

Pros and Cons

Pros

  • Easy to mix and apply, making it user-friendly.
  • Dries quickly, allowing for efficient project completion.
  • Suitable for a variety of materials, increasing its versatility.
  • Provides a durable repair that lasts.
  • Easily sands smooth, resulting in a professional finish.
  • Comes with a step-by-step guide for ease of use.

Cons

  • Requires proper surface preparation for optimal adhesion.
  • May require multiple applications for deep damage.
  • Sanding generates dust, requiring appropriate safety measures.
  • Matching the color to existing paint can be challenging.
  • Not suitable for structural repairs.
  • Requires additional products like primer and paint

Setup, Compatibility & Care

Setup:

  1. Preparation: Clean the damaged area thoroughly. Sand the area around the damage to provide a key for the filler.
  2. Mixing: Mix the filler with the hardener according to the manufacturer's instructions, usually a 2-3% ratio by weight.
  3. Application: Apply the mixed filler to the damaged area using a spreader. Apply in thin layers, allowing each layer to dry before adding another if necessary.
  4. Drying: Allow the filler to dry completely. Drying times vary depending on temperature and humidity, but usually take between 20-30 minutes.
  5. Sanding: Once dry, sand the filler smooth with progressively finer grades of sandpaper.

Compatibility:

  • Materials: Compatible with metal, fiberglass, and wood.
  • Incompatible Materials: Not designed for use on plastic bumpers unless the appropriate adhesion promoter is used.

Care:

  • Store the product in a cool, dry place away from direct sunlight.
  • Ensure the container is properly sealed when not in use.
  • Dispose of the product and packaging in accordance with local regulations.
  • Clean tools immediately after use with a suitable solvent.