Evo-Stik Instant Grab Wall Tile Adhesive - 1 Litre - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users effectively utilize Evo-Stik Instant Grab Wall Tile Adhesive for their tiling projects. It's ideal for both DIY enthusiasts and professionals seeking a reliable, ready-mixed adhesive for ceramic wall tiles. The key benefit is its instant grab feature, providing strong initial hold and making the tiling process easier. A key consideration is ensuring proper surface preparation for optimal adhesion.
All features
| Colour | White |
|---|---|
| Model Part Number | 30811581 |
| Brand | Evo-Stik |
Extended Product Information
FAQs
What surfaces is this adhesive suitable for?
This adhesive is suitable for most interior wall surfaces, including cement rendering, plaster, plasterboard, old glazed tiles, and glazed bricks.
Can this adhesive be used in a shower?
Yes, this adhesive is showerproof and suitable for use in bathrooms and other wet areas.
How much coverage can I expect from a 1-litre container?
You can expect approximately 1.2m² per litre with a notched trowel, or 0.3m² per litre with a solid bed. These figures are approximate and do not account for wastage, and assume flat surfaces.
How do I apply the adhesive?
Apply the adhesive to the wall using a notched trowel. The size of the notches on the trowel will affect the coverage and the amount of adhesive applied. Follow the tile manufacturer's recommendations.
How long should I wait before grouting?
Allow the adhesive to fully cure before grouting. The curing time will depend on environmental conditions and should be specified on the adhesive packaging.
Is this adhesive suitable for all types of tiles?
It is suitable for most ceramic wall tiles. Always check the tile manufacturer's recommendations to ensure compatibility.
How do I clean up the adhesive?
Clean any adhesive residue immediately with a damp cloth before it dries.
Troubleshooting
Tiles are slipping or sliding after application.
Ensure the wall surface is properly prepared and free of contaminants. Make sure you are using the correct notched trowel and that the adhesive is applied evenly. Check the expiry date of the adhesive.
Adhesive is not sticking to the surface.
Verify the wall surface is suitable for the adhesive (e.g., cement rendering, plaster, plasterboard). Ensure the surface is clean, dry, and free from dust or grease. Ensure the adhesive is not past its expiry date.
Pros and Cons
Pros
- Ready-mixed formula for convenience.
- Instant grab action prevents tile movement.
- Suitable for a range of common wall surfaces.
- Non-slip properties for secure tiling.
- Showerproof, making it suitable for wet areas.
Cons
- Coverage estimates are approximate and can vary.
- Requires proper surface preparation for optimal adhesion.
- Only suitable for interior wall applications.
- May not be suitable for all types of tiles.
Setup, Compatibility & Care
- Surface Preparation: Ensure the wall surface is clean, dry, and free from dust, grease, or loose particles. Any existing paint should be soundly adhered.
- Application: Apply the adhesive to the wall using a notched trowel, following the manufacturer's instructions for the recommended notch size. For solid bed applications, a different method will be required to get the correct coverage.
- Tile Placement: Position the tiles onto the adhesive, pressing firmly to ensure good contact. The instant grab feature will hold the tiles in place.
- Compatibility: Suitable for use with most common ceramic wall tiles. Always check tile manufacturer recommendations.
- Care: Allow the adhesive to fully cure before grouting. Avoid exposing the tiled surface to excessive moisture or cleaning agents during the curing period. Clean any adhesive residue immediately with a damp cloth.