Searchlight Picture Light - Antique Brass
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Searchlight Picture Light in Antique Brass is designed for homeowners looking to elegantly illuminate artwork and photographs. Its key benefit is the adjustable downlight from two pygmy lamps, allowing precise highlighting of displayed pieces, with a caveat that its IP20 rating makes it suitable only for dry indoor environments. The product features an antique brass finish, a metal construction, and an integrated pull switch for convenience.
All features
| Colour | Bronze |
|---|---|
| Model Part Number | 3008AB |
| Brand | Searchlight |
Extended Product Information
FAQs
What type of bulbs does this picture light use?
This picture light uses two E14 pygmy lamps with a maximum wattage of 25W each.
Can I use LED bulbs with this light?
Yes, you can use E14 LED bulbs as long as they do not exceed the 25W maximum per lamp and are compatible with dimming if you intend to use that feature.
Is this light suitable for a bathroom?
No, this picture light has an IP20 rating, meaning it is only suitable for dry indoor environments and should not be used in bathrooms or other areas with high moisture.
How do I adjust the light angle?
The light features a knuckle joint that allows you to manually adjust the angle of the light bar to direct the illumination precisely where you want it.
What is the finish of the light?
The finish is antique brass, providing a classic and stylish look.
Does it come with a dimmer switch?
The light itself is dimmable if fitted with dimmable E14 bulbs. It does not include a built-in dimmer control unit, but is compatible with wall-mounted dimmer switches.
What are the dimensions of the light?
The light has a height of 13cm, a width of 35cm, and a projection of 15cm from the wall.
Troubleshooting
Light does not turn on.
Check that the power supply is on and the circuit breaker is not tripped. Ensure the lamps are correctly installed and screwed in tightly. Verify the pull switch is functioning.
Light flickers or is inconsistent.
Try replacing the E14 lamps. If using dimmable lamps, ensure they are compatible with your dimmer switch or try with non-dimmable lamps to test.
Pull switch feels loose or stuck.
Gently inspect the pull switch mechanism for any obstruction. If damage is suspected, professional electrical advice may be needed.
Dimming feature not working.
Confirm that both installed E14 lamps are rated as dimmable and are compatible with your household dimmer system. Check wiring connections for the dimmer.
Pros and Cons
Pros
- Enhances artwork with focused, adjustable lighting.
- Stylish antique brass finish adds a decorative touch.
- Convenient pull switch for easy operation.
- Dimmable feature allows for customizable ambiance.
- Solid metal construction for durability.
Cons
- IP20 rating restricts use to dry indoor areas only.
- Requires specific E14 pygmy lamps, which may need separate purchase.
- Pull switch may not be ideal for all installation locations.
Setup, Compatibility & Care
Setup:
- Ensure power is switched off at the mains before installation.
- Mount the light bar securely to the wall using appropriate fixings (not included).
- Install two E14 pygmy lamps (max 25W each). Ensure lamps are dimmable if you wish to use the dimming feature.
- Connect the wiring according to local electrical codes.
- Restore power at the mains.
Compatibility:
- Lamp Type: Requires E14 pygmy lamps.
- Wattage: Maximum 25W per lamp.
- Dimmability: Compatible with dimmable E14 lamps for variable light output.
- Environment: Suitable for dry, indoor locations only (IP20).
Care:
- Always disconnect power before cleaning.
- Wipe the fixture gently with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Periodically check lamp fittings for tightness.