Shopping.co.uk

Osmo Polyx Raw Effect - 0.75 L - Osmo - 3044

Not AvailableOsmo Polyx Raw Effect - 0.75 L - Osmo - 3044
Not Available
Not Available

Osmo Polyx-Oil Raw is a transparent, matt wood finish that uniquely combines the advantages of nat...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to protect and enhance their wooden surfaces with Osmo Polyx-Oil Raw. It's a user-friendly product that provides a durable, natural-looking finish while being stain-resistant and water-repellent. Keep in mind that proper surface preparation is key for optimal results.

All features

Model Part Number3044
BrandOsmo

Extended Product Information

FAQs

How many coats of Osmo Polyx-Oil Raw are needed?

One coat is sufficient for basic protection, but two coats are recommended for higher durability.

Can Osmo Polyx-Oil Raw be used on outdoor furniture?

No, it is intended for interior use only.

How do I clean the surface after applying Osmo Polyx-Oil Raw?

Use a damp cloth or a mild wood cleaner. Avoid harsh chemicals or abrasive cleaners.

How long does it take for Osmo Polyx-Oil Raw to dry?

Typically, the drying time is around 8-10 hours, but it may vary depending on environmental conditions.

Can I apply Osmo Polyx-Oil Raw over a previously finished surface?

No, you must remove the existing finish before applying Osmo Polyx-Oil Raw.

Is Osmo Polyx-Oil Raw safe for use around children and pets?

Yes, it is made from natural plant-based oils and waxes, making it environmentally friendly and safe to use once fully cured.

What type of applicator should I use?

You can use an Osmo Flat Brush, a lint-free cloth, or a similar applicator.

What is the coverage of Osmo Polyx-Oil Raw?

Approximately 1 liter covers about 12 square meters with one coat, depending on the wood type and surface texture.

Troubleshooting

Finish is not drying properly.

Ensure adequate ventilation, and check the temperature and humidity levels. Make sure the coat is applied thinly. Drying time can vary based on conditions.

Uneven finish or streaks appear.

Make sure you stirred the oil before use. Apply the oil in thin, even coats, and remove any excess oil immediately.

Surface is sticky after drying.

There may be excess oil on the surface. Wipe down the surface thoroughly with a clean cloth.

Color appears different than expected.

The color can vary depending on the wood type. Test in an inconspicuous area first. Ensure the wood is properly prepared.

Pros and Cons

Pros

  • Provides a durable and long-lasting finish.
  • Enhances the natural beauty of wood.
  • Easy to apply, saving time and effort.
  • Environmentally friendly due to its natural ingredients.
  • Water and dirt-repellent properties make cleaning simple.
  • Suitable for high-traffic areas.

Cons

  • Requires proper surface preparation for best results.
  • May require multiple coats for optimal protection.
  • Color can vary depending on the wood type.
  • Slower drying time compared to some other finishes.
  • May require periodic maintenance or reapplication in high-wear areas.
  • Raw finish may slightly alter the wood's color.

Setup, Compatibility & Care

Setup

  1. Preparation: Ensure the wood surface is clean, dry, and frost-free with a maximum moisture content of 18%. Remove old paints, lacquers, and thoroughly clean old microporous stains.
  2. Surface Treatment: Fill small cracks or holes with Osmo Wood Filler.
  3. Application: Stir Osmo Polyx-Oil Raw well before use. Apply a thin coat using an Osmo Flat Brush or a similar applicator.
  4. Drying: Allow the first coat to dry completely according to the manufacturer's instructions, typically around 8-10 hours under normal conditions.
  5. Second Coat (Optional): For increased durability, apply a second coat after the first has dried completely.

Compatibility

Osmo Polyx-Oil Raw is compatible with most types of wood.

Care

  • Clean with a damp cloth or a mild wood cleaner.
  • Avoid harsh chemicals or abrasive cleaners.
  • For heavy-use areas, reapply as needed to maintain protection.