Laser Tools Wiper Arm 3 Piece Set Puller Set - TL7402
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 3-piece wiper arm puller set from Laser Tools is designed for mechanics and DIY enthusiasts needing to safely remove stubborn wiper arms from numerous vehicle types. Its key benefit is providing a versatile and effective solution to avoid damage to the wiper mechanism or surrounding bodywork. A potential caveat is its limited reach and width, which may not suit all oversized or deeply set wiper arms. The set includes two sets of legs for adaptability and offers a maximum reach of 50mm and a width of 60mm.
All features
| Model Part Number | TL7402 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What is the maximum size wiper arm this puller can accommodate?
The puller has a maximum reach of 50mm and a width capacity of 60mm.
Does this set come with instructions?
The set is designed for intuitive use. Basic setup involves selecting the correct legs, positioning them, and tightening the center screw. Detailed instructions for specific vehicle types are generally not included, but the tool's function is straightforward.
Can this tool be used on other types of car parts?
This tool is specifically designed for removing wiper arms. While it might superficially fit other components, using it for purposes other than its intended design could lead to damage or unsafe operation.
How many pieces are included in the set?
The set includes three main pieces: the central pulling screw mechanism and two sets of legs (which may count as multiple individual pieces depending on design, but it's generally referred to as a 3-piece set representing the core components).
What is the warranty on this product?
Information regarding warranty is typically provided by the retailer. Please refer to your purchase documentation or the retailer's website for warranty details.
Is this tool suitable for professional mechanics?
Yes, this tool is designed to be robust and effective, suitable for professional use in automotive workshops as well as for discerning DIY users.
Troubleshooting
Wiper arm does not move when screw is tightened.
Ensure the legs are securely gripping the wiper arm base and the center screw is correctly positioned on the spline. The arm may be severely seized; apply a penetrating oil and allow it to soak before attempting again. Ensure the tool's reach and width are adequate for the specific arm.
Legs slip off the wiper arm.
Ensure you have selected the correct set of legs for the wiper arm design and that they are properly seated. Tighten the legs evenly if applicable to your chosen configuration. Avoid overtightening the center screw which could cause the legs to splay outwards.
Tool appears damaged or bent.
Cease use immediately. Inspect the tool for any signs of damage. If damaged, do not use and consider replacement to prevent further damage to the vehicle or risk of injury.
Pros and Cons
Pros
- Versatile for numerous vehicle types.
- Includes two sets of legs for enhanced adaptability.
- Safely removes wiper arms without causing damage.
- Durable construction for longevity.
- Provides a professional solution for a common automotive task.
Cons
- Limited reach (50mm) may not be sufficient for all vehicles.
- Limited width (60mm) may not accommodate all wiper arm designs.
- Requires careful application to avoid damage if misused.
- Not suitable for non-automotive applications.
Setup, Compatibility & Care
Setup:
- Select the appropriate set of legs (two sets are provided) that best fit the base of the wiper arm.
- Position the legs around the wiper arm spline.
- Screw the center screw down onto the wiper arm stud or shaft, ensuring it is firmly seated.
- Slowly tighten the center screw. This will draw the wiper arm upwards off the spline.
Compatibility:
This set is designed for use on numerous vehicles. The maximum reach is 50mm and the maximum width is 60mm. It is suitable for most standard wiper arm splines. Always check the dimensions against your specific vehicle's wiper arm if unsure.
Care:
- After use, clean the puller with a dry cloth to remove any dirt or grease.
- Store the tool in its original packaging or a dry, protected environment to prevent rust.
- Periodically check the screws and legs for wear or damage and replace if necessary.