Clarke CTG8 Air Texture Gun - 5091120
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Clarke CTG8 Air Texture Gun is a professional tool for decorators and builders, offering efficient, large-surface application of various wall and ceiling textures. Its main benefit is versatility, allowing for 20 different spraying combinations, but a potential drawback is the learning curve for achieving specific finishes.
All features
| Model Part Number | 5091120 |
|---|---|
| Brand | Clarke |
Extended Product Information
FAQs
What air pressure is recommended for the CTG8?
Consult your air compressor's manual and the specific material manufacturer's recommendations. Typically, pressures range from 30-60 PSI, but may vary.
Do I need an air compressor?
Yes, an air compressor is required to operate the Clarke CTG8 Air Texture Gun. It is not included with the product.
How do I clean the texture gun?
Disassemble the hopper and nozzle assembly. Flush thoroughly with water or a suitable solvent for the sprayed material. Ensure all parts are dried completely before reassembly.
Can this gun spray paint?
The CTG8 is designed for textured wall and ceiling finishes. While some thicker paints might be sprayable, it is optimized for drywall compounds and textures, not standard paints.
What is the capacity of the hopper?
The hopper has a generous capacity of 7.95 litres.
How many spray patterns can I create?
The gun offers 5 distinct spray patterns, which, combined with 4 interchangeable nozzles, allow for up to 20 different spraying combinations.
Is the offset elbow connector always necessary?
The 45-degree offset elbow connector is particularly useful for comfortable and effective application on ceilings or in awkward overhead positions. It can be removed if not needed for wall applications.
Troubleshooting
No material spraying
Check air pressure, ensure the nozzle is not clogged, and verify the hopper is filled with material. Make sure the trigger is fully depressed.
Inconsistent spray pattern
Clean the nozzle and surrounding area. Ensure the material viscosity is correct and evenly mixed. Adjust air pressure and pattern settings.
Material clogging the gun
Clean the gun immediately after use. Ensure material is properly mixed and free of lumps. Use a coarser nozzle if the material is particularly thick.
Leaking from hopper connection
Ensure the hopper is securely attached to the gun. Check the seal for damage and clean any debris.
Pros and Cons
Pros
- Versatile application with 20 spray combinations.
- Large hopper reduces downtime.
- Comfortable use on ceilings with offset elbow.
- Suitable for various texture materials.
- Durable construction for professional use.
Cons
- Requires an air compressor (not included).
- Potential learning curve for mastering different finishes.
- Cleaning can be time-consuming.
- Can be heavy when fully loaded.
Setup, Compatibility & Care
Setup:
- Connect the Clarke CTG8 to a suitable air compressor using appropriate hoses and fittings (air compressor and hoses not included).
- Select the desired nozzle and spray pattern.
- Fill the hopper with your chosen texture material, ensuring it is properly mixed and within the viscosity range recommended for the tool.
- Test the spray pattern on a scrap surface before proceeding to the main application.
Compatibility:
The CTG8 is designed to spray most liquid dry wall materials, including:
- Joint cement
- Ceiling acoustics
- Wall texture compounds
- Splatter finishes
- Semi-fog finishes
Care:
- Cleaning is crucial after each use to prevent material from drying and clogging the gun. Disassemble the hopper, nozzle, and any attached parts.
- Use water or a solvent appropriate for the material sprayed to clean all components.
- Ensure all parts are thoroughly dried before reassembly or storage.
- Store the texture gun in a clean, dry place.