Speedball Fabric Screen Printing Ink - Violet
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Speedball Fabric Screen Printing Ink in Violet is a high-quality, water-based ink for creating bold, durable prints on various fabrics. It is suitable for both novice and experienced screen printers, offering smooth application and a soft, flexible finish without cracking or peeling. While it provides excellent coverage and vibrant, fade-resistant colors, users should be aware that for the most opaque results on dark fabrics, an opaque version of the ink is recommended. Key features include easy cleanup with soap and water, heat-settable permanence, and a non-toxic formula safe for studio use.
All features
| Brand | Speedball |
|---|
Extended Product Information
FAQs
How do I clean up the Speedball Fabric Screen Printing Ink?
Clean up is simple with soap and water. Wash screens, squeegees, and tools immediately after use with warm water and a mild soap.
How long does the ink need to cure before washing?
After heat setting, it is recommended to let the print cure for at least 24 hours, and up to 72 hours for maximum durability, before the first wash.
Can this ink be used on any type of fabric?
It is designed for most porous fabrics like cotton and cotton blends. It may work on other materials, but results can vary. Test on a scrap piece first.
What is the best way to heat set the ink?
You can use a household iron on the fabric's recommended setting (usually cotton, no steam) for 3-5 minutes, or a heat press at 350°F (177°C) for 60-90 seconds, with a protective layer over the print.
Is this ink safe for children?
Yes, Speedball Fabric Screen Printing Ink carries the AP (Approved Product) Seal from the ACMI, meaning it is certified non-toxic and safe for studio or classroom use.
Will the violet color show up well on black fabric?
The standard violet ink provides good color but may not be as vibrant or opaque on very dark fabrics. For maximum impact on black or dark materials, Speedball Opaque Fabric Screen Printing Ink is recommended.
Troubleshooting
Ink is too thick or not spreading evenly
Ensure the ink is well-stirred. If still too thick, a very small amount of water can be added, but use sparingly to avoid diluting permanence.
Print is not permanent after washing
Verify that the ink was properly heat-set according to instructions. Ensure the iron or heat press reached the correct temperature and the duration was sufficient.
Ink is drying too quickly on the screen
Work in a cooler environment if possible. Lightly misting the screen with water can sometimes help, but avoid excessive moisture.
Poor coverage on dark fabric
For dark fabrics, consider using Speedball Opaque Fabric Screen Printing Ink for better vibrancy and coverage. Ensure thorough application with the standard ink.
Pros and Cons
Pros
- Easy cleanup with soap and water.
- Produces a soft, flexible print on fabric.
- Water-based and AP certified non-toxic.
- Good coverage and fade resistance.
- Suitable for a variety of fabrics.
Cons
- May require an opaque version for best results on dark fabrics.
- Requires heat setting for wash-resistance.
- Can be more challenging to achieve extreme opacity on very dark textiles with standard formula.
Setup, Compatibility & Care
Setup: Ensure your screen is properly prepared and your fabric is taut. Apply a consistent amount of Speedball Fabric Screen Printing Ink to the screen using a spatula or palette knife. Use a squeegee to pull the ink through the screen onto the fabric, ensuring even pressure.
Compatibility: This ink is designed for use on most porous fabrics, including 100% cotton, cotton-poly blends, and other natural or synthetic textile materials. It can also be used on paper or cardboard for non-fabric applications.
Care: Clean all equipment immediately after use with soap and water. For permanent, wash-resistant prints on fabric, the ink must be heat-set. This can be done using a standard household iron (set to the fabric's recommended temperature, typically cotton setting, with no steam) or a heat press. Place a piece of parchment paper or a cloth over the design and iron for 3-5 minutes, or heat press for 60-90 seconds at 350°F (177°C). Allow the ink to cure for 24-72 hours before washing.