Indasa 2K Plastic Repair Adhesive - 50ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Indasa 2K Plastic Repair Adhesive is a professional-grade solution designed for automotive technicians and DIY enthusiasts who need a reliable way to bond or repair damaged plastic components like bumpers, tabs, and interior trim. Its primary advantage is its two-part polyurethane formula that delivers a high-strength, permanent bond that withstands the rigors of automotive use. However, users should note that the fast-acting cure time requires quick and precise application to ensure successful results before the adhesive sets.
All features
| Model Part Number | 472767 |
|---|---|
| Brand | Indasa |
Extended Product Information
FAQs
Can I use this on all types of plastic?
It is designed for most automotive plastics; however, it is best to test on a small, hidden area if you are unsure of the plastic composition.
How long does it take to cure?
The product features a fast-acting formula, but exact cure times depend on ambient temperature and thickness of the application.
Does the kit include a dispensing gun?
No, the 50ml cartridge requires a standard dual-cartridge applicator gun which is sold separately.
Can this be sanded after it cures?
Yes, once fully cured, the adhesive can be sanded, primed, and painted to match the surrounding finish.
What should I do if the nozzle clogs?
Remove the clogged nozzle and replace it with a fresh one. Never try to clear and reuse a static mixer nozzle.
Troubleshooting
Adhesive is not coming out evenly
Check that both plungers of the dispensing gun are moving at the same rate and verify that the nozzle is not clogged.
Adhesive remains tacky after the expected cure time
Ensure the product was stored correctly and that the mixing nozzle was properly attached to allow for the correct 1:1 ratio.
Bond failed or separated
Ensure the plastic surface was sanded and properly degreased with a solvent cleaner prior to application.
Pros and Cons
Pros
- High-strength bonding for structural repairs
- Convenient 50ml dual-cartridge delivery
- Includes mixer nozzle for consistent mixing
- Excellent adhesion to various automotive plastics
Cons
- Fast cure time may be challenging for beginners
- Single-use nozzles may require spares for multiple sessions
- Limited to 50ml capacity for small to medium repairs
Setup, Compatibility & Care
To begin using the adhesive, insert the 50ml cartridge into a compatible dual-cartridge dispensing gun. Before attaching the nozzle, level the two plungers to ensure both components flow evenly. Attach the supplied static mixer nozzle securely to the end of the cartridge. If you are not using the entire cartridge at once, leave the used nozzle on the cartridge to act as a seal, but replace it with a fresh nozzle for the next application to avoid internal clogging. Store the product in a cool, dry place away from direct sunlight to maintain the integrity of the chemical components. Always wear protective gloves and work in a well-ventilated area.