Godox AC Adapter for AD600Pro Witstro Outdoor Flash - AD-AC600Pro
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for photographers using the Godox AD600 Pro Witstro Outdoor Flash who need extended, uninterrupted power. The Godox AC Adapter AD-AC600Pro offers a solution for long studio shoots by allowing direct connection to a wall socket, eliminating battery limitations. A minor caveat is its reliance on a power outlet, making it less portable than battery power for on-location work.
All features
| Series | AD600 Pro |
|---|---|
| Model Part Number | AD-AC600Pro |
| Brand | Godox |
Extended Product Information
FAQs
Can I use this adapter with the Godox AD600B or AD600BM?
No, this adapter (AD-AC600Pro) is specifically designed for the Godox AD600 Pro model only. It will not fit or function with the AD600B or AD600BM models.
What is the voltage range supported by this adapter?
The adapter supports a universal voltage range of 100 to 240 VAC, with a frequency of 50 or 60 Hz, making it usable in most countries worldwide.
Does the adapter come with a power cable?
Yes, the adapter connects to the flash unit, and typically includes the necessary AC power cord to connect to a wall outlet.
Will using the AC adapter affect the flash's recycling speed or power output?
No, when powered by the AC adapter, the AD600 Pro can deliver its full power output and maintain normal recycling speeds, similar to when powered by its battery, but with continuous availability.
Is the cooling fan noisy?
The adapter features an active cooling fan designed to prevent overheating. While it produces some noise, it is generally considered to be at a level that does not interfere with typical studio operations.
Can I use this adapter outdoors?
While the adapter allows for continuous power, it requires a connection to a standard wall outlet. Therefore, its use is primarily limited to indoor or studio environments where power outlets are available. It does not offer the same portability as the battery for true outdoor, off-grid shooting.
Troubleshooting
Flash unit does not power on when connected to the adapter.
Verify that the power cord is securely plugged into both the adapter and a functioning wall outlet. Check if the wall outlet is receiving power by testing it with another device. Ensure the adapter is correctly seated in the flash unit's battery slot.
Flash unit powers off unexpectedly or shows an overheating warning.
Ensure the cooling fan vents on the adapter are not blocked. Allow the unit to cool down in a well-ventilated area before attempting to use it again. If the issue persists, there may be an internal fault with the adapter or flash unit.
Intermittent power or flickering light output.
Check the connection between the adapter and the flash unit, as well as the connection to the wall outlet. Try a different power outlet. Ensure the power cord is not damaged.
Pros and Cons
Pros
- Provides virtually unlimited runtime for the AD600 Pro in studio settings.
- Eliminates the need to carry or charge spare batteries for studio work.
- Active cooling system prevents overheating during long shoots.
- Universal voltage input makes it suitable for international travel.
- Simple plug-and-play installation.
Cons
- Requires a nearby power outlet, limiting portability for on-location shooting.
- Adds a slight increase in the overall footprint of the flash setup.
- The cooling fan may produce a low level of audible noise.
- Does not provide the battery-powered mobility of the original unit.
Setup, Compatibility & Care
Setup:
- Ensure the Godox AD600 Pro flash unit is powered off.
- Remove the original battery from the AD600 Pro.
- Align the AD-AC600Pro adapter with the battery compartment and slide it in until it clicks securely.
- Connect the adapter's power cord to a suitable wall outlet (100-240 VAC, 50/60 Hz).
- Turn on the AD600 Pro flash unit using its power button.
Compatibility:
- This adapter is specifically designed for the Godox AD600 Pro Witstro Outdoor Flash.
- It is not compatible with other Godox flash models or different strobe systems.
Care:
- Keep the adapter and its power cord clean and free from dust. Use a dry or slightly damp cloth for cleaning; avoid harsh chemicals.
- Ensure the cooling fan intake and exhaust vents are kept clear of obstructions to maintain proper airflow.
- Store the adapter in a dry place when not in use.