kenable Power Cord - White - 2m
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This white 2-meter kenable power cord is designed for users needing to connect standard UK mains-powered equipment with an IEC C13 inlet to a wall socket. Its primary benefit is providing a reliable and safe power connection for devices like PC base units, monitors, and printers. A potential caveat is its standard length, which might not be suitable for all placement needs.
All features
| Colour | White |
|---|---|
| Model Part Number | 007728 |
| Brand | kenable |
Extended Product Information
FAQs
What appliances can I use this cable with?
This cable is suitable for appliances with an IEC C13 inlet, such as desktop PC base units, monitors, printers, photocopiers, and some audio equipment. Always check your appliance's power requirements.
What is the fuse rating in the UK plug?
The UK mains plug is fitted with a 5A fuse for basic protection.
Can I use this cable for a high-power device like a desktop gaming PC?
While the IEC C13 connector can handle up to 10A, the integrated 5A fuse in the UK plug might be limiting for very high-power consumption devices under heavy load. It is generally suitable for standard PCs and office equipment.
Is the cable length sufficient for all setups?
The cable is 2 meters long, which is suitable for most standard desk setups. For installations requiring longer reach, you may need to consider an extension cord or a longer power cable.
How do I clean the power cord?
Unplug the cord completely. Wipe it with a soft, dry or slightly damp cloth. Avoid using any liquid cleaners and ensure the cable is thoroughly dry before reconnecting.
What is the cable construction?
The cable is constructed with H05VV-F 0.75mm² conductors and features durable, sonically welded PVC connectors.
Is this cable suitable for outdoor use?
No, this power cord is designed for indoor use only in dry conditions.
Troubleshooting
Appliance does not power on
Ensure the IEC C13 connector is fully seated in the appliance and the UK plug is securely inserted into the wall socket. Test the wall socket with another known working device. Check if the 5A fuse in the plug has blown; if so, replace it with a correctly rated fuse (5A).
Intermittent power or flickering
Check for loose connections at both ends of the cable. Inspect the cable for any signs of damage or kinking. Ensure the cable is not being overloaded by the connected appliance.
Cable feels excessively warm during use
Unplug the cable immediately and do not use it. This could indicate an overload or an internal fault. Check the power rating of your appliance; it may require a heavier gauge cable or a different fuse rating. Contact the manufacturer of your appliance for advice.
Pros and Cons
Pros
- Reliable connection for common office and home electronics.
- Features a standard fused UK plug for safety.
- Durable, sonically welded connectors enhance longevity.
- Convenient 2-meter length suits most standard setups.
- Versatile compatibility with IEC C13 power inlets.
Cons
- The 5A fuse may be insufficient for very high-power devices (though the C13 connector itself supports 10A).
- Fixed 2-meter length may be too short for some installations.
- Does not offer advanced features like surge protection.
- White color may show dirt more readily than darker options.
Setup, Compatibility & Care
Setup:
- Ensure the appliance you intend to power has an IEC C13 power socket.
- Verify that the appliance's power requirements are compatible with a 5A fused UK mains plug.
- Plug the IEC C13 connector firmly into the appliance's power socket.
- Plug the UK mains plug into a suitable wall socket.
- Turn on the appliance.
Compatibility:
- Plug Type: Standard UK 3-Pin Mains Plug.
- Connector Type: IEC C13 (Female socket on the appliance required).
- Voltage: Suitable for standard UK mains voltage (230-240V).
- Fuse Rating: 5A (The C13 connector itself is rated for 10A, but the UK plug is fused at 5A).
Care:
- Avoid placing the cable near heat sources or in areas where it can be sharply bent or crushed.
- Inspect the cable and connectors regularly for any signs of damage (fraying, cracks).
- To clean, unplug the cable from both the appliance and the wall socket. Use a dry or slightly damp cloth. Do not use liquid cleaners or immerse the cable in water.
- Ensure the cable is fully dry before plugging it back in.