Silverhook Big Boy Fibre Glass Repair Kit - BIGK1
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Silverhook Big Boy Fibre Glass Repair Kit is an all-in-one solution designed for both DIY enthusiasts and professionals needing to mend cracks, holes, and splits on a variety of surfaces. The key benefit is its versatility, allowing for repairs on materials like brick, metal, plastic, and glass fibre. A key caveat is the need for proper surface preparation to ensure optimal adhesion. This guide will help you understand how to use the kit effectively and achieve long-lasting repairs.
All features
| Model Part Number | BIGK1 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
How much area can the kit cover?
Coverage depends on the size of the included fibreglass mat and the depth/size of the damage. For larger repairs, additional kits or materials may be needed.
Can I use the kit on a fuel tank?
Yes, the repaired material is resistant to petrol and can be used on fuel tanks, provided the damage is minor and the repair is properly executed.
What is the shelf life of the resin and hardener?
Shelf life can vary, but generally, the resin and hardener should be used within 12 months of purchase. Store in a cool, dry place.
Can I paint over the repair?
Yes, after the repair has fully cured, you can sand the surface and paint it to match the surrounding area.
What safety precautions should I take?
Wear gloves, and work in a well-ventilated area. Avoid contact with skin and eyes. In case of contact, rinse with water and seek medical attention if irritation persists. Follow the instructions on the packaging.
What is the setting time?
Initial setting time is between 50-70 minutes. Full cure time depends on ambient temperature and humidity.
Troubleshooting
Repair is not adhering to the surface.
Ensure the surface is clean, dry, and properly abraded. Re-apply the repair, ensuring thorough coverage and contact.
Repair is not hardening.
Check the mixing ratio of resin and hardener. Ensure that you have mixed them thoroughly. Verify the hardener is not expired.
The repair is cracking.
Ensure that the fibreglass mat overlaps the damaged area by at least 20mm. Apply multiple layers for larger repairs. Allow sufficient time for the repair to cure completely.
Air bubbles in the repair.
Press the fibreglass mat firmly against the surface during application to remove air bubbles. Use a brush to smooth the surface and remove any trapped air.
Pros and Cons
Pros
- Versatile use across multiple materials.
- Creates a strong and durable repair.
- Resistant to common chemicals and fuels.
- Easy to apply and use.
- Complete kit with all necessary components.
- Can withstand high temperatures.
Cons
- Requires proper surface preparation for optimal adhesion.
- Setting and drying times need to be observed.
- May require additional finishing steps (e.g., sanding, painting).
- Not suitable for structural repairs in some cases.
- Mixing the resin and hardener must be done correctly.
Setup, Compatibility & Care
- Preparation:
- Ensure the surface to be repaired is clean, dry, and abraded. Remove any loose debris, rust, or paint.
- For optimal adhesion, lightly sand the area around the damage.
- Mixing:
- In the mixing cup, combine the resin with the hardener according to the instructions on the packaging.
- Mix thoroughly until the mixture is uniform.
- Application:
- Cut the fibreglass mat to the desired size, ensuring it overlaps the damaged area.
- Apply the resin mixture to the fibreglass mat, saturating it completely.
- Place the mat over the damaged area, pressing it down to ensure good contact.
- For larger repairs, apply multiple layers of the fibreglass mat and resin.
- Setting & Drying:
- Allow the repair to set for 50-70 minutes.
- Drying time varies based on ambient temperature; allow sufficient time for complete curing.
- Finishing:
- Once the repair is firm, trim any excess material.
- Use body filler to smooth out any imperfections.
- Sand the repaired area and apply primer and paint as needed.
Compatibility: The Silverhook Big Boy Fibre Glass Repair Kit is compatible with a wide range of materials, including:
- Brick
- Metal
- Plastic
- Wood
- Aluminium
- Glass Fibre
Care:
- Store the kit in a cool, dry place away from direct sunlight.
- Dispose of used materials properly, following local regulations.
- Wear gloves and work in a well-ventilated area during application.
- Avoid contact with skin and eyes; in case of contact, rinse thoroughly with water and seek medical attention if irritation persists.