Push Wire Inline Splice Connector - 2773-2401
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians, contractors, and DIY enthusiasts looking to quickly and reliably connect electrical wires. The WAGO 2773-2401 Push Wire Inline Splicing Connector simplifies the process of joining solid and stranded conductors, saving time and ensuring secure connections. Keep in mind that this connector is designed for specific wire gauges and applications; always verify compatibility before use.
All features
| Model Part Number | 2773-2401 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What wire sizes are compatible with the WAGO 2773-2401?
It accepts solid conductors from 0.75mm² to 4mm² (18 AWG to 12 AWG) and stranded conductors from 1.5mm² to 4mm².
What is the rated voltage and current for this connector?
The rated voltage is 450V AC, and the rated current is 32A.
What is the operating temperature range?
The operating temperature range is -35 - 60 °C, with a surrounding maximum air temperature of 85°C.
Can I reuse the WAGO 2773-2401 connector?
The WAGO 2773-2401 is designed for single-use applications. It is recommended to replace the connector after disconnecting the wires.
What type of insulation material is used?
The connector uses Polycarbonate (PC) insulation material.
What is the correct wire strip length?
The correct wire strip length is 10-11mm.
Is the connector compliant with safety standards?
Yes, it is UL 486C approved and RoHS compliant.
Troubleshooting
Wire connection is loose.
Ensure the wire is stripped to the correct length (10-11mm) and fully inserted into the connector. Check that the wire gauge is within the connector's specifications.
Connector won't accept the wire.
Make sure the wire type and gauge are compatible with the connector. Check for any damage to the connector.
High resistance in the connection.
Ensure the wire is properly inserted and making good contact. Replace the connector if necessary.
Pros and Cons
Pros
- Fast and easy installation, saving time on the job.
- Suitable for a range of wire sizes and types, increasing versatility.
- Transparent housing allows for visual inspection of connections.
- Compact design, ideal for confined spaces.
- High voltage and current ratings for a variety of applications.
- RoHS compliant for environmental safety.
Cons
- Requires specific wire strip lengths (10-11mm).
- Not suitable for all wire types; check compatibility.
- May require more force to insert stranded wires compared to solid.
- Limited to two-conductor connections.
Setup, Compatibility & Care
- Preparation: Ensure the power is off before working with electrical wires. Strip the wire to the correct length (10-11mm).
- Insertion: Insert the stripped wire into the connector. For solid wires, simply push them in. For stranded wires, it may be necessary to twist the strands slightly before insertion.
- Inspection: Visually inspect the connection through the transparent housing to ensure the wire is fully inserted.
- Compatibility: This connector is compatible with solid conductors from 0.75mm² to 4mm² and stranded conductors from 1.5mm² to 4mm².
- Care: Avoid exceeding the rated voltage (450V AC) and current (32A). Do not use in environments exceeding the maximum surrounding air temperature of 85°C. Clean with a dry cloth if needed. Avoid using corrosive cleaning agents.