Loops 4X 6.5" 120W Outdoor Rated Garden Wall Speakers - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These Loops 4X 6.5" 120W Outdoor Rated Garden Wall Speakers in Black are designed for users seeking durable, high-quality audio solutions for outdoor environments like gardens, patios, or health club spa areas. Their key benefit is robust, weatherproof performance with flexible installation options for either 100V or 8 OHM systems. A potential caveat is the need to correctly set the 8 OHM impedance for standard Hi-Fi systems. Features include a 6.5" driver, water-resistant PP cone, rotary selector for system configuration, IP54 weatherproofing, and included mounting brackets.
All features
| Colour | Black |
|---|---|
| Series | string |
| Brand | Loops |
Extended Product Information
FAQs
Are these speakers suitable for continuous outdoor exposure?
Yes, these speakers are IP54 rated, meaning they are protected against dust ingress and splashing water, making them suitable for most outdoor environments.
Can I use these with a standard home stereo system?
Yes, provided your home stereo system has an 8 OHM speaker output. Ensure you set the speaker's rotary switch to '8 OHM'.
What is the difference between 100V and 8 OHM operation?
100V is a constant voltage system often used for multi-speaker installations over longer distances, allowing for easier power management. 8 OHM is a standard low impedance system used in most home Hi-Fi setups, where individual speaker impedance is matched to the amplifier.
How do I set the correct wattage for a 100V system?
Use the rotary selector switch on the rear of the speaker to choose the desired wattage tapping (5W, 10W, 20W, or 40W) based on your amplifier's capabilities and desired volume level for that specific speaker.
What is the warranty period for these speakers?
Please refer to the product packaging or the manufacturer's website for specific warranty details, as warranty periods can vary.
How many speakers are included in this listing?
This listing is for a pack of 4 speakers (which equates to 2 pairs).
Can I paint these speakers?
While not explicitly recommended, if painting, use a suitable spray paint designed for plastics and apply very light coats to avoid damaging the driver or affecting sound quality. Ensure the speaker is completely dry before and after painting.
Troubleshooting
No sound from the speaker.
Check all cable connections for security and correct polarity. Ensure the amplifier is powered on and set to the correct input source. Verify the rotary switch is set correctly for your system type (100V or 8 OHM).
Distorted or muffled sound.
Confirm the speaker is not overloaded by the amplifier's output. Check if the 8 OHM setting is correctly selected if using a low impedance system. Ensure the speaker driver is not obstructed.
Speaker is not loud enough.
If using a 100V system, ensure you have selected an appropriate wattage tapping for your desired volume. If using an 8 OHM system, check amplifier settings and ensure it has sufficient power output.
Crackling or intermittent sound.
Inspect the speaker cable for damage. Ensure all connections are clean and tight. If the issue persists, try a different speaker to isolate the problem.
Pros and Cons
Pros
- Excellent for outdoor environments due to IP54 rating.
- Versatile connectivity options for both 100V and 8 OHM systems.
- Durable construction with water-resistant components.
- Clear sound quality suitable for background music and public address.
- Easy to install with included mounting hardware.
Cons
- Requires careful setting of the 8 OHM impedance for standard Hi-Fi systems.
- Limited adjustability for advanced audio tuning.
- The 1M hard-wired cable may require extension for some installations.
- Optional M6 screw sockets for mounting require separate purchase of hardware.
Setup, Compatibility & Care
Setup:
- Determine your system type: 100V line or standard 8 OHM low impedance.
- If using an 8 OHM system, locate the rotary selector switch on the rear of the speaker and ensure it is set to '8 OHM'.
- If using a 100V system, select the desired wattage tapping (5W, 10W, 20W, or 40W) using the rotary switch.
- Connect the speaker cable to your amplifier's corresponding speaker outputs, observing correct polarity (+/-).
- Mount the speakers using the included bracket. For alternative mounting, use the M6 screw sockets.
Compatibility:
- Compatible with amplifiers supporting 100V line output or standard 8 OHM speaker outputs.
- Ensure amplifier power ratings are suitable for the selected speaker configuration (e.g., 60W RMS at 8 OHM).
Care:
- Clean the exterior with a slightly damp cloth. Avoid harsh chemicals or abrasive materials.
- Periodically check for debris that might obstruct the speaker driver or ports.
- Ensure connections remain secure and free from corrosion, especially in humid environments.