Integral LED Evofire Fire Rated Downlight - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone installing or considering the Integral LED Evofire Fire Rated Downlight. The key benefit is its fire-rated design and ease of installation. A potential caveat is that it requires separate purchase of GU10 LED lamps. This downlight features a can-less design for better airflow, a compact build with a thin bezel, and compliance with building regulations for fire safety. It includes push-fit terminals for easy wiring.
All features
| Colour | White |
|---|---|
| Brand | Integral LED |
Extended Product Information
FAQs
What type of lamps are compatible?
The downlight is designed for use with GU10 LED lamps, with a maximum power of 10W. Lamps are not included.
What are the dimensions?
The downlight has a diameter of 85mm, a depth of 83mm, and requires a cut-out of 70mm - 100mm.
Is it fire-rated?
Yes, it is fire-rated, providing 30-60-90 minute fire resistance for solid timber and 30-60 minutes for I-Joist constructions.
How do I install the downlight?
Follow the installation steps outlined in the 'Setup, Compatibility & Care' section. Ensure the mains power is switched off before starting.
Are the terminals easy to use?
Yes, it features screwless push-fit terminals for easy wiring.
Can I use it with insulation?
Yes, it includes a loft 'insulation coverable' guard. Ensure the guard is correctly positioned.
What building regulations does it comply with?
It complies with Building Regulations parts B, C, E, and L.
Troubleshooting
Downlight doesn't turn on.
Check the GU10 lamp is installed correctly. Verify the mains power connection.
Flickering light.
Ensure the LED lamp is compatible. Try a different GU10 lamp.
Difficult to install.
Make sure the cut-out diameter is within the specified range (70-100mm). Double-check wiring and connections.
Pros and Cons
Pros
- Fire-rated for enhanced safety.
- Improved airflow extends LED lamp life.
- Easy and quick installation with push-fit terminals.
- Compact design allows for versatile ceiling applications.
- Complies with key building regulations.
Cons
- GU10 LED lamps are not included and must be purchased separately.
- Requires a cut-out of 70mm - 100mm, which needs pre-planning.
Setup, Compatibility & Care
- Preparation: Ensure the power is turned off before starting the installation.
- Cut-Out: Create a circular cut-out in the ceiling with a diameter of 70mm - 100mm.
- Wiring: Connect the mains wires to the screwless push-fit terminals. Ensure correct polarity.
- Lamp Installation: Insert a GU10 LED lamp (max 10W) into the fitting. (Not Included)
- Fitting: Push the downlight into the cut-out, ensuring it sits flush with the ceiling.
- Insulation: Ensure the loft 'insulation coverable' guard is correctly positioned if applicable.
*Compatibility:*
- Compatible with standard mains voltage (230V).
- Designed for use with GU10 LED lamps (max 10W).
*Care:*
- Clean the downlight with a soft, dry cloth. Do not use abrasive cleaners.
- Regularly check the lamp for proper function and replace as needed.