MENNEKES Industrial Power Plug - 32A 5-Pin 400V IP54
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The MENNEKES 13584 is a professional-grade 32-amp, 5-pin industrial power plug designed for robust 400V systems. It offers enhanced safety and durability for demanding environments with its IP54 rating and ERGO design for superior handling. A key caveat for users is its specific 5-pin configuration, which is not universally compatible with all systems. Key features include screw connection technology, heat-resistant components, nickel-plated contacts, and a rubberised cable gland for secure connections.
All features
| Model Part Number | 13584 |
|---|---|
| Brand | MENNEKES |
Extended Product Information
FAQs
What does IP54 mean?
IP54 indicates that the plug is protected against dust ingress (5) and splashing water from any direction (4), making it suitable for moderately harsh environments.
Can I use this plug with a 230V system?
No, this plug is rated for 400V and is designed for specific 400V industrial systems. Using it with a 230V system can lead to damage and safety hazards.
What is the significance of the 6H reference?
The '6H' refers to the phase position or rotation for the specific pin configuration, which is crucial for the correct operation of certain industrial machinery.
How do I ensure a secure connection with the ERGOcontact feature?
The ERGOcontact system utilizes screw terminals for secure wire termination and features a rubberised cable gland for strain relief and kink protection. Ensure all screws are tightened and the gland is properly secured around the cable.
Is this plug suitable for outdoor permanent installations?
While IP54 offers protection against splashes and dust, it is primarily designed for industrial plug-and-play applications rather than permanent outdoor weather exposure. For constant outdoor use, consider higher IP-rated enclosures.
What is the warranty period for the MENNEKES 13584?
Please refer to the specific retailer or MENNEKES documentation for warranty information, as it can vary by region and seller.
Can I replace the AM-TOP plug 21428 with this model?
Yes, the product information states that the PowerTOP Xtra R plug (like the 13584) is designed to replace the AM-TOP plug 21428, indicating compatibility for direct substitution in relevant applications.
Troubleshooting
Plug does not power connected equipment
Verify that the power source is active and correctly wired. Ensure the plug is fully seated in a compatible socket. Check all internal wire connections for security.
Intermittent power or poor connection
Inspect the socket contacts for corrosion or damage. Ensure the cable is properly secured within the plug's strain relief and that individual conductors are tightly screwed into their terminals. Clean contacts if necessary.
Cable gland feels loose or does not provide strain relief
Re-tighten the cable gland around the cable sheath. Ensure the correct cable diameter is being used for the gland size.
Overheating during use
Immediately disconnect power. Check that the connected load does not exceed the plug's 32A rating. Verify all internal connections are tight and that contacts are clean. Inspect for any signs of internal damage.
Pros and Cons
Pros
- Robust construction for industrial environments
- Enhanced user safety with ERGOdesign and clear identification
- Reliable performance in dusty and splash-prone conditions (IP54)
- Durable, high-quality internal components like nickel-plated contacts
- Secure connection with strain relief and anti-kinking features
Cons
- Specific 5-pin configuration limits compatibility with standard outlets
- Requires appropriate 400V power source and compatible socket
- Not suitable for low-voltage or standard domestic use
- Higher upfront cost compared to general-purpose connectors
Setup, Compatibility & Care
Setup:
- Ensure the power source is isolated before connecting.
- Prepare the cable by stripping the insulation to the appropriate length as per the internal markings.
- Connect each conductor to the designated screw terminal within the plug using the ERGOcontact screw connection technology. Ensure wires are securely fastened.
- Utilize the rubberised cable gland for strain relief and to prevent kinking, tightening it firmly around the cable sheath.
- Close the plug housing, ensuring all seals are properly seated and the safety slide is engaged.
Compatibility:
- This plug is designed for 400V, 32A, 5-pin systems.
- It requires a compatible 5-pin, 400V socket (coupler).
- The 6H phase rotation is specific and must match the intended application.
- Verify that your power supply and connected equipment match these specifications.
Care:
- Periodically inspect the plug for any signs of damage, especially to the housing, pins, and cable gland.
- Clean the exterior with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
- Ensure the cable gland remains tight to maintain the IP54 rating.
- Store in a clean, dry environment when not in use.