Frenchic Plum Pudding Trim Paint - 500ML


Currently unavailable


Currently unavailable
This Frenchic Plum Pudding Trim Paint is designed for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and trims with a durable, soft-satin finish. Its key benefit is the simplified preparation process, acting as a self-priming and self-sealing paint that eliminates the need for separate primers or top coats, saving time and effort. A potential consideration is its specific colour, 'Plum Pudding,' a daring purple with red undertones, which requires careful consideration for your desired aesthetic.
| Colour | Purple |
|---|---|
| Model Part Number | 39780694818903 |
| Brand | Frenchic |
No, this is a self-priming and self-sealing paint, meaning it functions as a primer, paint, and top coat all in one. No additional products are required.
It is suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, and various furniture including kitchen cupboards and built-in furniture made from wood and laminate.
A 500ml tin covers approximately 7m² with a single coat, or about 3.5m² with two coats. Coverage can vary depending on the surface porosity and application thickness.
While it is robust and scuff-resistant, it is best suited for general interior use. For very high-moisture areas like constantly steamy bathrooms or heavily used kitchen splashbacks, ensure good ventilation and consider a specific sealant if extra protection is needed.
Once fully cured (approx. 7-14 days), clean gently with a slightly damp cloth. Avoid harsh chemicals or abrasive scrubbers.
This paint is specifically formulated for trim, woodwork, and furniture. While it might adhere to walls, it is not designed for large wall areas and may not provide the desired finish or durability.
Touch dry in approximately 1-2 hours, but recoat in 1-2 hours. The paint cures to its full hardness over 7-14 days.
Stir the paint thoroughly. If still very thick, add a *very* small amount of water (a teaspoon per 500ml) and mix well. Avoid adding too much water as this can affect the finish and durability.
Ensure the surface was clean, dry, and free from contaminants before painting. Glossy or very smooth surfaces may require light sanding or a specific primer if adhesion issues persist.
Apply paint using even strokes. Use a high-quality synthetic brush and avoid overloading it. Ensure even coverage with each coat. Lightly sand between coats if necessary for a smoother finish.
Colour appearance can vary based on lighting conditions, the surface it's applied to, and the number of coats. Ensure you have applied at least two full coats and view in intended lighting.
Preparation: Ensure surfaces are clean, dry, and free from grease or wax. For previously painted surfaces, a light de-glossing or sanding may be beneficial if the existing finish is glossy. For laminate or very smooth surfaces, ensure thorough cleaning.
Compatibility: This paint is suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, and various furniture items including wood and laminate. It is *not* recommended for exterior use or for areas subject to constant immersion in water.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Two coats are generally recommended for best coverage and durability, allowing adequate drying time between coats (typically 1-2 hours, but can vary with humidity and temperature).
Care: Clean up spills and brushes immediately with water. The paint cures to its full hardness over approximately 7-14 days, so treat it gently during this period. For routine cleaning, use a slightly damp cloth. Avoid abrasive cleaners.