90 Degree Patch Lead Adaptor - White - 20 Pack - TUK
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The TUK PS90WH20 is designed for users needing to manage network cable routing in confined spaces. Its primary benefit is creating a 90° angle for standard network patch leads, reducing the clearance required behind the plug to just 16mm, with the main caveat being its specific function for angled connections only. This compact converter pack of 20 allows for flexible cable direction (up, down, left, or right) with negligible impact on network performance. It is suitable for cables with an outer diameter up to 6.5mm.
All features
| Model Part Number | PS90WH20 |
|---|---|
| Brand | TUK |
Extended Product Information
FAQs
What is the main purpose of the TUK PS90WH20?
The TUK PS90WH20 is designed to create a 90-degree angle for standard network patch leads, allowing for easier cable management and connection in tight spaces where a straight cable would be problematic.
How much space does this adaptor save?
It reduces the space required behind the plug to just 16mm, compared to the space needed for a straight cable connection.
Can I use this with any network cable?
It is compatible with standard network patch leads that have an outer diameter up to 6.5mm and use standard RJ45 connectors.
Will this affect my network speed?
The impact on network performance is negligible, meaning it should not significantly affect your internet speed or network reliability for most applications.
How do I install the adaptor?
Simply push the RJ45 connector of your network patch lead firmly into the female port of the adaptor until it clicks.
What direction can the cable be turned?
The adaptor allows the cable to be directed upwards, downwards, left, or right, providing flexibility in routing.
What is included in the pack?
The pack contains 20 of the TUK PS90WH20 90-degree patch lead adaptors.
Troubleshooting
Connection is loose or intermittent.
Ensure the RJ45 connector is fully seated and 'clicked' into the adaptor. Check that the patch lead's outer diameter does not exceed 6.5mm. Try a different patch lead to rule out a faulty connector.
Network speed seems reduced.
While performance impact is negligible, in very high-demand scenarios, ensure the patch lead itself is of good quality and meets the required speed standards. Ensure the adaptor is not physically stressed.
Adaptor does not fit the patch lead.
Verify that you are using a standard RJ45 connector and that the patch lead's outer diameter is within the 6.5mm limit. The adaptor is designed for specific tolerances.
Pros and Cons
Pros
- Effectively solves space constraints for network cable routing.
- Easy to use, requiring no tools for installation.
- Maintains network signal integrity.
- Versatile in directing cable flow.
- Cost-effective solution when purchased in a multi-pack.
Cons
- Only provides a 90° angle; not suitable for other bend requirements.
- Adds a slight bulk at the connection point.
- Requires the patch lead to have a sufficiently flexible outer jacket.
- Not designed for permanent or heavy-duty installations.
Setup, Compatibility & Care
Setup:
- Take a standard network patch lead.
- Gently push the RJ45 connector of the patch lead into the female port of the TUK PS90WH20 adaptor.
- Ensure a firm click as the connector seats.
- The adaptor now creates a 90° angle, directing the cable as needed.
Compatibility:
- Compatible with standard RJ45 connectors.
- Suitable for network patch leads with an outer diameter up to 6.5mm.
- Supports standard Ethernet cable categories (e.g., Cat5e, Cat6, Cat6a).
Care:
- Wipe clean with a dry or slightly damp cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Store in a dry environment when not in use.