Sealey Spray Gun - Suction Feed - General Purpose - 1.5mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Sealey SSG2 spray gun is designed for general-purpose use, particularly for applying base coats in automotive or workshop environments. Its key benefit lies in its adjustable controls for paint flow and fan width, allowing for precise application. A potential consideration is that it is supplied with a specific suction feed pot, and alternative set-ups for different paint types or application methods are available separately.
All features
| Model Part Number | SSG2 |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
What is the main advantage of the suction feed system?
The suction feed system allows the gun to be used in various orientations, drawing paint from the attached pot. It's particularly useful for tasks where the gun needs to be maneuvered.
Can I use this gun for primer?
While it is a general-purpose gun, the 1.5mm nozzle is typically best suited for base coats. For thicker primers, you might need a gun with a larger nozzle or a different set-up. Ensure your primer's viscosity is compatible.
How often should I clean the spray gun?
It is crucial to clean the spray gun immediately after every use to maintain performance and prevent clogs. Thorough cleaning ensures longevity and consistent results.
What type of compressor is recommended?
The gun requires an air compressor that can supply sufficient air volume (CFM) and pressure (PSI) for spray gun operation. Specific requirements can vary based on paint type and desired finish, but a compressor rated for automotive spraying is generally suitable.
Are other nozzle sizes available?
Yes, Sealey offers alternative set-ups with different nozzle sizes separately. These can be purchased to adapt the gun for different paint viscosities or application requirements.
What is the weight of the spray gun?
The spray gun weighs approximately 1.54 pounds.
Troubleshooting
Uneven spray pattern
Check for blockages in the nozzle or air cap. Ensure paint viscosity is correct and that the fan width and air pressure are properly adjusted.
Paint not flowing properly
Verify the suction tube is fully submerged in paint and the pot is sealed. Check for air leaks in the system. Ensure the paint flow control is sufficiently open.
Spitting or sputtering
This often indicates air in the paint line or insufficient air pressure. Check for air leaks and ensure the air compressor is providing consistent pressure. Clean the nozzle and needle assembly.
Gun leaking air
Check all connections for tightness, including the air inlet and the paint pot seal. Inspect seals and gaskets for wear or damage and replace if necessary.
Pros and Cons
Pros
- Versatile for applying base coats.
- Adjustable controls for precise paint application.
- Suitable for water-based paints.
- Includes a durable aluminum suction feed pot.
Cons
- Suction feed system may require more frequent refills than gravity feed.
- Primarily designed for base coats; may require different set-ups for primers or clear coats.
- Alternative set-ups are sold separately.
- Weight of 1.54 lbs might be a factor for extended use.
Setup, Compatibility & Care
Setup:
- Attach the aluminum screw-type suction feed pot to the gun base.
- Pour the desired paint into the pot, ensuring it does not exceed the maximum fill line.
- Screw the pot securely onto the gun.
- Connect your air supply to the gun's air inlet, ensuring the pressure is within the recommended range for the paint and desired finish.
- Adjust the paint flow and fan controls to your starting preference.
Compatibility:
- Paint: Suitable for water-based paints. For other paint types (e.g., solvent-based, lacquers), ensure compatibility or consider alternative nozzle/needle sets or gun types.
- Air Compressor: Requires an air compressor capable of delivering adequate CFM (Cubic Feet per Minute) and PSI (Pounds per Square Inch) for spray gun operation. Consult your air compressor manual for specific recommendations.
Care:
- Cleaning: Clean the spray gun immediately after each use to prevent paint from drying and clogging the internal passages and nozzle. Disassemble the pot and clean it thoroughly with the appropriate solvent for the paint used. Flush the gun with solvent and compressed air.
- Storage: Store the gun in a clean, dry place. Ensure all parts are dry before reassembly and storage.