Fernox Heat Transfer Fluid HP-eg - 20L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Fernox Heat Transfer Fluid HP-eg - 20L, a concentrated heat transfer fluid designed to protect Air and Ground Source Heat Pumps. The primary benefit is protection against corrosion, limescale, and frost, with frost protection ranging from -10 to -33C. Note that while this fluid offers robust protection, regular system checks are still recommended to ensure optimal performance.
All features
| Model Part Number | 62595 |
|---|---|
| Brand | Fernox |
Extended Product Information
FAQs
How often should I check the fluid concentration?
It is recommended to check the fluid concentration annually, especially before the winter season.
Can I use this fluid in any heat pump system?
This fluid is specifically designed for Air and Ground Source Heat Pumps. Ensure the product is compatible with the materials in your system.
What should I do if the fluid leaks?
Immediately address the leak. Contain the spill and consult a professional for repairs and proper disposal of the leaked fluid.
How do I dispose of the used fluid?
Dispose of the used fluid according to local regulations. Contact your local waste management facility for guidance on proper disposal methods.
Is Fernox Heat Transfer Fluid HP-eg safe to handle?
Handle with care, wearing appropriate protective equipment (gloves, eye protection). Avoid contact with skin and eyes. Refer to the safety data sheet for detailed information.
What are the signs of fluid degradation?
Discoloration, reduced heat transfer efficiency, and the presence of sediment are signs of degradation. Regular checks will identify such changes.
Can I mix this fluid with other heat transfer fluids?
It is not recommended to mix this fluid with other heat transfer fluids. This can reduce its effectiveness and may cause undesirable reactions. Always flush the system if changing fluids.
Troubleshooting
System is not heating efficiently.
Check the fluid concentration; top up if needed. Inspect the system for blockages or airlocks.
Fluid appears discolored.
This could indicate contamination or degradation. Flush the system and replace the fluid.
System pressure is low.
Check for leaks. Top up the system with the diluted fluid to the recommended pressure.
Frost protection appears inadequate.
Check the fluid concentration. If necessary, increase the concentration or replace the fluid.
Pros and Cons
Pros
- Effective corrosion protection, extending the lifespan of heat pump components.
- Prevents limescale build-up, maintaining system efficiency.
- Provides reliable frost protection, preventing freezing in cold conditions.
- Easy to use with clear dilution instructions.
- Designed specifically for heat pump systems, ensuring compatibility.
- Long-lasting formula requiring less frequent maintenance.
Cons
- Requires proper dilution; incorrect ratios can reduce effectiveness.
- Ethylene glycol is toxic and requires careful handling.
- Regular system checks are still necessary despite the fluid's protective properties.
- Requires specific disposal methods due to its chemical composition.
- May require professional assistance for initial installation or system flush.
- Frost protection levels vary based on concentration, requiring user knowledge.
Setup, Compatibility & Care
- Compatibility: Ensure compatibility with your heat pump system's materials. Fernox Heat Transfer Fluid HP-eg is suitable for most common metals used in heat pumps.
- Dilution: Dilute the fluid according to the manufacturer's instructions to achieve the desired frost protection level. Refer to the product label for specific dilution ratios.
- Filling the System: Use a suitable pump to introduce the diluted fluid into your heat pump system. Ensure all air is bled from the system.
- System Check: After filling, check the system for leaks. Monitor the pressure and temperature gauges to confirm the system is operating correctly.
- Routine Checks: Regularly inspect the fluid for any signs of contamination or degradation. Check the fluid concentration annually, especially before winter.
- Disposal: Dispose of the used fluid according to local regulations. Contact your local waste management facility for guidance.