QUIKSTEEL Extreme Temperature Steel Reinforced Epoxy Putty - 3oz Pack - 18003
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a durable, high-temperature repair solution. QUIKSTEEL Extreme Temperature Epoxy Putty is ideal for repairing furnaces, BBQs, and other items exposed to extreme heat, offering a strong, flame-resistant bond. However, it's important to note that the putty's strength increases with heat, but proper application is key for optimal results.
All features
| Model Part Number | 18003 |
|---|---|
| Brand | QUICK-GRIP IRWIN |
Extended Product Information
FAQs
What is the maximum temperature the putty can withstand?
The putty can withstand temperatures up to 1316°C.
Can I use this putty on my car's exhaust system?
Yes, it is suitable for exhaust system repairs.
How long does it take for the putty to cure?
Curing time varies depending on the temperature, but it typically takes several hours.
Is the putty flame resistant?
Yes, the putty is flame resistant.
What materials can this putty be used on?
It is suitable for steel and other high-temperature applications. It can be used for furnaces, BBQs, and more.
Do I need to mix the putty?
Yes, you need to knead the putty until it achieves a uniform color before application.
Can I sand the putty after it cures?
Yes, once cured, the putty can be sanded, drilled, or painted.
Troubleshooting
Putty is not adhering to the surface.
Ensure the surface is clean, dry, and free from any contaminants. Roughen the surface with sandpaper for better adhesion.
Putty is not hardening.
Ensure you have mixed the putty thoroughly. If the putty is old, it might have expired. Inconsistent temperature may affect the cure time.
Putty cracks after curing.
Ensure the putty is applied in the correct thickness. Over-application can lead to cracking.
Pros and Cons
Pros
- Withstands extreme temperatures up to 1316°C.
- Provides a strong, steel-reinforced bond.
- Resistant to direct flame.
- Easy to apply and use.
- Offers a permanent repair solution.
- Suitable for a wide range of high-heat applications.
Cons
- Strength increases with heat, but requires proper application.
- May require surface preparation for optimal adhesion.
- Not suitable for all types of materials.
- Curing time may vary depending on temperature.
- May have a limited working time after mixing.
- Requires proper ventilation during application.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly. Remove any loose debris, rust, or grease.
- Mixing: Cut off the required amount of putty and knead it until it reaches a uniform color.
- Application: Apply the putty to the damaged area, pressing firmly to ensure it fills the crack or hole.
- Curing: Allow the putty to cure completely. The curing time will depend on the ambient temperature.
- Compatibility: This putty is compatible with steel and other high-temperature applications. Always test on a small, inconspicuous area first.
- Care: Once cured, the repair is permanent and requires no special care. Avoid any abrasive cleaning methods.