Humbrol Enamel Paint - Gloss - 14ml - Ferrari Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for model enthusiasts and hobbyists looking to achieve a high-quality, durable finish on their projects using Humbrol Enamel Paint. The key benefit is its versatility, allowing application on various surfaces such as plastic, metal, and wood. Note that drying times vary depending on the finish and environmental conditions. This guide will cover everything from application techniques to troubleshooting common issues.
All features
| Model Part Number | 22.AA6608 |
|---|---|
| Brand | Humbrol |
Extended Product Information
FAQs
What is the best way to apply Humbrol Enamel Paint?
You can apply it with a brush or airbrush. For brush application, apply thin, even coats. For airbrushing, thin the paint with Humbrol Enamel Thinners.
How long does it take for Humbrol Enamel Paint to dry?
Gloss finishes are touch dry in 1-2 hours and fully harden in 24 hours. Matt and Satin finishes are touch dry in 20-40 minutes and fully dry in up to 24 hours. Metallic finishes take approximately 10 days to fully dry. Drying times can vary based on environmental conditions.
What surfaces can I use Humbrol Enamel Paint on?
It can be used on a wide range of surfaces, including plastic, metal, wood, glass, ceramics, cardboard, sealed plaster, and sealed hardboard. Always test on a small area first to ensure compatibility.
How do I clean my brushes or airbrush after using Humbrol Enamel Paint?
Use Humbrol Enamel Thinners to clean your brushes and airbrushes immediately after use. The paint is permanent once dry.
Can I mix different Humbrol Enamel Paint colors?
Yes, you can mix different Humbrol Enamel Paint colors to create custom shades. Ensure the paints are thoroughly mixed before application.
How much coverage can I expect from a 14ml tin?
A 14ml tin covers approximately 0.3m² depending on the thickness of application.
What thinner should I use with Humbrol Enamel Paint?
Use Humbrol Enamel Thinners to thin the paint. The usual thinning ratio is 2 parts paint to 1 part thinner for airbrushing.
Troubleshooting
Paint is too thick and clogs the airbrush or leaves brush strokes.
Thin the paint with Humbrol Enamel Thinners before application. For brush application, ensure the brush is clean and apply in thin, even coats. For airbrushing, use the correct thinner ratio.
Paint takes too long to dry.
Ensure adequate ventilation. Apply thin coats and allow sufficient drying time between coats. The drying time depends on the finish (Gloss, Matt, etc.) and environmental conditions (temperature, humidity).
Paint doesn't adhere to the surface.
Ensure the surface is properly prepared (clean, dry, and lightly sanded). Apply a primer if necessary, especially on non-plastic surfaces. Check the paint's expiration date.
Paint has runs or sags.
Apply thinner coats of paint. Avoid applying too much paint at once. Ensure the surface is level while the paint dries.
Pros and Cons
Pros
- Durable and long-lasting finish.
- Suitable for various materials.
- Easy to apply with a brush or airbrush.
- Fast drying times, especially for gloss finish.
- Wide range of colors available.
- Trusted brand with a long history.
Cons
- Drying times can vary depending on the finish and environment.
- Requires proper ventilation due to solvent-based formula.
- Cleaning brushes and airbrushes requires specific thinners.
- May require multiple coats for optimal results.
- Not suitable for all plastics (always test a small area first).
- Metalcote colors require a longer drying time.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from grease or dust. Lightly sand the surface if necessary for better adhesion.
- Application: Stir the paint thoroughly before use. Apply thin, even coats with a brush or airbrush. Avoid applying thick coats, as this can lead to runs and slower drying times.
- Thinning (for airbrushing): Use Humbrol Enamel Thinners to thin the paint. The recommended ratio is 2 parts paint to 1 part thinner.
- Cleaning: Clean brushes and airbrushes immediately after use with Humbrol Enamel Thinners. The paint is permanent once dry.
- Storage: Store the paint in a cool, dry place away from direct sunlight and heat. Ensure the lid is tightly sealed to prevent the paint from drying out.
- Compatibility: Compatible with a wide range of materials including plastic, metal, wood, glass, ceramics, cardboard, sealed plaster, sealed hardboard and more. Always test on a small, inconspicuous area first to check compatibility.