Fenceman Battery - 9V - 90Ah

Currently unavailable

Currently unavailable
This Fenceman 9V battery is designed for fencers requiring portable power. Its key benefit is its versatility, offering different power outputs for various fencing needs. A caveat is that some configurations are non-rechargeable, requiring replacement. The battery incorporates multiple functionalities, including 7.5V Saline for up to 0.5J fencers, Double PP8 Alkaline for up to 0.3J fencers with 45Ah, and a PJ996 non-rechargeable torch battery function.
| Model Part Number | 0194810063002 |
|---|---|
| Brand | Fenceman |
Its primary advantage is its multi-functional design, offering various voltage outputs suitable for different electric fence energizers and doubling as a torch battery.
The 90Ah rating specifically applies to the 9V Alkaline and Saline configuration for fencers up to 0.8j.
Some configurations within this battery are non-rechargeable. The specific 9V, 7.5V Saline, and 6V Double PP8 Alkaline components are designed for single-use and require replacement when depleted.
Battery life depends heavily on the type of energizer used, the length of the fence, environmental conditions, and which specific battery configuration is active. Higher power draws will deplete the battery faster.
The 9V option provides more power (up to 0.8j fencers), while the 7.5V Saline option is for lower-power fencers (up to 0.5j).
For very long fence lines or high-tensile fencing, a higher-powered, dedicated energizer and battery system may be more appropriate. This battery is best suited for shorter to medium-length fences or temporary applications.
Ensure the battery is correctly installed with aligned terminals. Check if the battery is depleted and needs replacement. Verify that the energizer is compatible with the battery's voltage output.
Confirm the correct voltage setting is being used for your energizer and fencing setup. Check for any obstructions or damage to the fence wires. The battery may be nearing the end of its life and requires replacement.
Ensure the PJ996 section is properly connected and that the battery has not been depleted by powering the fence energizer. Replace the battery if necessary.
Setup: This battery is designed to be a direct replacement for compatible electric fence energizers and devices requiring specific battery types (9V, 7.5V Saline, 6V, D Cell, PJ996). Ensure the energizer or device is switched off before inserting or removing the battery. Match the battery terminals to the device's terminals correctly. Refer to your specific energizer or device manual for detailed installation instructions.
Compatibility: Primarily compatible with electric fence energizers designed for 9V, 7.5V, or 6V power sources. Also compatible with devices requiring a PJ996 or 1.5v D Cell battery.
Care: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Avoid short-circuiting the terminals. If the battery will not be used for an extended period, remove it from the device. Dispose of used batteries responsibly according to local regulations.