Dulux Trade Diamond Satinwood Metal & Wood Paint - White - 2.5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to use Dulux Trade Diamond Satinwood for a durable, beautiful finish on interior wood and metal surfaces. The key benefit is its exceptional resistance to stains, scratches, and grease, making it ideal for high-traffic areas. Keep in mind that proper surface preparation is crucial for optimal results.
All features
| Colour | White |
|---|---|
| Model Part Number | 5282774 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
What surfaces can I use Dulux Trade Diamond Satinwood on?
It is suitable for interior wood and metal surfaces.
How many coats are needed?
Two coats are generally recommended for optimal coverage and durability.
How long does it take to dry?
Minimum drying time is 4 hours, recoat after 16 hours.
How do I clean my tools?
Clean brushes and rollers with water immediately after use.
Is this paint water-based?
Yes, it is a water-based formulation.
Is this paint suitable for exterior use?
No, it is suitable for interior use only.
Where can I find the product datasheet?
You can find full information at duluxtrade.co.uk or by telephoning 0333 222 70 70.
Troubleshooting
Paint not adhering properly
Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces to improve adhesion.
Uneven finish or brush marks
Use a high-quality brush or roller. Apply thin, even coats, and avoid over-brushing or over-rolling.
Paint appears to be peeling
Ensure the surface is properly prepared and primed if necessary. Avoid painting in extreme temperatures or humidity.
Pros and Cons
Pros
- Durable and long-lasting finish
- Easy to clean and maintain
- Quick drying and low odor
- Water-based for easier cleanup and environmental considerations
Cons
- Requires proper surface preparation for optimal results
- May require multiple coats for full coverage, especially over darker colours
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from any contaminants. Sand the surface for a smooth finish.
- Application: Apply the paint by brush or roller. Two coats are recommended for full coverage. Allow the recommended drying time between coats.
- Tool Cleaning: Clean brushes and rollers with water immediately after use.
- Storage: Store in a cool, dry place and protect from frost.
- Compatibility: Suitable for use on interior wood and metal surfaces. Always check for compatibility with existing coatings.
- Recommended Tools: Use good quality synthetic (nylon polyester) brush or short pile synthetic/mohair roller designed for water-based paints.