Cuprinol Ultimate Garden Wood Preserver - Golden Oak - 4L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you understand and effectively use Cuprinol Ultimate Garden Wood Preserver in Golden Oak (4L). Ideal for protecting and enhancing garden wood, it provides up to 5 years of color and protection against rot and decay. Keep in mind that the final color can vary based on the wood type and previous treatments, so a test area is recommended before full application.
All features
| Model Part Number | 5206089 |
|---|---|
| Brand | Cuprinol |
Extended Product Information
FAQs
What surfaces can I use this on?
You can use this product on various types of rough or smooth planed wood, such as sheds, fences, summer houses, gates, and arbours.
How many coats are required?
Apply a minimum of two even coats for a uniform finish and optimal protection.
How long does it take to dry?
It takes 2-6 hours to dry, depending on the weather conditions.
What is the coverage per litre?
The product covers approximately 5m² per litre.
Can I use this on wood in contact with the ground?
No, this product is not suitable for use on timber in ground contact situations.
How should I clean the tools after use?
Clean up any spills while still wet. Remove as much product as possible from equipment before cleaning with water.
How long will the color last?
The UV filters provide long-lasting color for up to 5 years.
How should I store this product?
Do not store or use in extreme temperatures and protect from frost.
Troubleshooting
Color is not as expected
Test a representative area of the wood before applying the product to the entire surface. Wood type and previous treatments can affect the final color.
Product is repelling from the previous coat
Ensure recoating within 2-3 days. If longer, try a test area to check for repellence.
Uneven finish
Ensure even application, avoiding splashing. Apply two coats for a uniform finish.
Slow drying time
Ensure proper ventilation and check weather conditions, as humidity and temperature can affect drying time.
Product is not adhering to the wood
Make sure the wood surface is clean, dry, and free of any previous coatings or treatments that might prevent adhesion.
Pros and Cons
Pros
- Provides long-lasting color and protection.
- Protects against rot, decay, and blue stain.
- Easy to apply with a brush.
- Water-based formula for easy cleanup.
- Offers advanced weather protection.
- Available in a range of colors
Cons
- Color can vary based on the wood type.
- Requires two coats for optimal protection.
- Not suitable for timber in ground contact situations.
- Recoating is recommended within 2-3 days.
- Requires appropriate surface preparation.
Setup, Compatibility & Care
- Surface Preparation: Ensure the wood surface is dry and free from dirt, algae, and previous treatments. Remove any algae, lichen, fungi, or moss.
- Application: Apply a minimum of two even brush coats. Allow the previous coat to soak in before applying the next. Recoat within 2-3 days.
- Drying Time: Allow 2-6 hours of drying time between coats under normal weather conditions.
- Compatibility: Suitable for rough or smooth planed wood. Not for use on timber in ground contact.
- Tool Cleaning: Clean up spills immediately with water and household detergent. Clean tools with water.
- Storage: Do not store or use in extreme temperatures and protect from frost.