Shopping.co.uk

Fiddes Hard Wax Oil - Whiskey - 250ml

Not AvailableFiddes Hard Wax Oil - Whiskey - 250ml
Not Available

A blend of natural oils & waxes offering exceptional durability & resistance for internal natural ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for DIY enthusiasts and professionals seeking a durable and natural finish for interior wood surfaces. Fiddes Hard Wax Oil in Whiskey offers exceptional resistance to wear and water, enhancing wood's natural beauty with a satin/matt sheen. A key caveat is the need for thorough ventilation during and after application.

All features

Model Part Number5060147671612
BrandFiddes

Extended Product Information

FAQs

Can I use Fiddes Hard Wax Oil on exterior wood?

No, this product is specifically formulated for interior natural wood surfaces.

Do I need to sand between coats?

Generally, no sanding is required between coats. If a very light surface imperfection exists, a gentle buff may suffice once dry. Ensure the surface is dust-free before applying the second coat.

How many coats are recommended?

A maximum of two thin coats is generally recommended. However, certain dense or oily woods may only require a single application.

What is the best way to apply the oil?

Apply thinly and evenly using a good quality bristle or synthetic brush, following the direction of the wood grain. Remove any surplus material immediately with a cloth.

How should I clean my tools after use?

Clean brushes and applicators with White Spirit.

What kind of finish does this product provide?

It provides a natural satin/matt finish that is water repellent and tread-fast.

How long does the finish last?

The durability depends on the wear and tear of the surface. For high-traffic areas, re-application may be needed over time. Follow the re-application guidelines when necessary.

Troubleshooting

Product appears sticky or gummy

Too much product was applied or surplus was not removed thoroughly. Ensure application is thin and all excess is wiped off immediately after application. Allow adequate drying time.

Uneven sheen or finish

This can be caused by uneven application or insufficient removal of excess product. Apply thinly and evenly, and always wipe off any surplus. Ensure consistent drying conditions.

Slow drying time

This is likely due to cold, damp, or humid conditions. Ensure the application area is warm and dry, and maintain good ventilation. Longer drying periods are normal in adverse conditions.

Wood appears too dark or blotchy

Test application on a small, hidden area first. Some dense or oily woods may react differently and require only a single, very thin coat, followed by buffing. Ensure the surface is prepared correctly.

Pros and Cons

Pros

  • Offers excellent protection for high-traffic areas.
  • Maintains and enhances the natural aesthetic of wood.
  • Easy to apply with no need for a separate primer.
  • Quick drying time speeds up project completion.
  • Provides a beautiful, natural-looking satin/matt finish.

Cons

  • Requires thorough ventilation during and after application.
  • Application needs to be thin and even to avoid issues.
  • May require longer drying times in cold or humid conditions.
  • Surplus material must be removed immediately to prevent problems.
  • Certain oily woods might only need one coat, requiring careful testing.

Setup, Compatibility & Care Instructions

Preparation:

  • Ensure the wood surface is clean, dry, and free from any existing finishes.
  • Sand the surface with 150-grade sandpaper or a 150-grit sanding disk.
  • Remove all dust thoroughly after sanding.

Application:

  • Always test on an inconspicuous area first.
  • Apply in a well-ventilated room. Ensure ventilation during and after application.
  • Stir the contents thoroughly before and during use.
  • Apply thinly and evenly, following the direction of the wood grain.
  • Remove any surplus material immediately with a clean cloth.
  • Maximum of two coats is recommended.
  • Apply at room temperature.
  • Fiddes Hard Wax Oil is ready to use and does not require thinning.

Drying:

  • Allow 4-6 hours drying time in warm, dry, well-ventilated conditions. Overnight drying is preferable.
  • Longer drying periods may occur in cold, damp, or humid environments.

Cleaning Applicators:

  • Clean brushes and cloths with White Spirit.

Maintenance:

  • For re-application, ensure the surface is clean and dry. Apply sparingly and remove excess.
  • Certain dense or oily woods may only require a single application, followed by buffing to achieve the desired sheen.