J-B Weld Steel Stick Epoxy Putty - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a strong, reliable solution for metal repairs. J-B Weld SteelStik is a hand-mixable epoxy putty ideal for automotive, household, and industrial applications. It offers industrial-strength bonding and can be molded, patched, and repaired, but remember that the curing time is relatively quick, so plan your application accordingly.
All features
| Colour | Grey |
|---|---|
| Brand | Netagon |
Extended Product Information
FAQs
How long does it take for SteelStik to cure?
It sets in 3-5 minutes and fully cures in 60 minutes.
Can I paint over J-B Weld SteelStik?
Yes, once it is fully cured, you can paint over it.
What temperature can SteelStik withstand?
It can withstand temperatures up to 300°F (149°C).
Is SteelStik waterproof?
Yes, SteelStik is waterproof after it has fully cured.
Can I use SteelStik on plastic?
SteelStik is designed for metal; it may not adhere well to all plastics. It's best used on metal surfaces.
How should I store SteelStik?
Store it in a cool, dry place, away from direct sunlight.
Can I use SteelStik on a fuel tank?
No, SteelStik is not recommended for fuel tank repairs.
Troubleshooting
Putty is not hardening.
Ensure that the putty was mixed thoroughly until the color is uniform. Check the expiration date. Ensure the surface was properly prepared.
Poor adhesion.
Clean the surface thoroughly to remove any dirt, rust, or grease. Roughen the surface with sandpaper for better adhesion.
Putty is difficult to mold.
Knead the putty longer to soften it before application. Work quickly as the setting time is short.
Pros and Cons
Pros
- Easy to apply and use with no special tools required.
- Provides a permanent, durable repair solution.
- Can be used on various metal surfaces.
- Fast curing time saves time and effort.
- Once cured, it can be finished like metal (drilled, tapped, painted, etc.).
Cons
- Quick setting time requires careful planning and immediate application.
- May not be suitable for extremely high-stress applications.
- Color is limited to dark grey.
- Surface preparation is crucial for optimal bonding.
Setup, Compatibility & Care
- Preparation:
- Clean the surface thoroughly. Remove any rust, grease, or paint.
- For best results, roughen the surface with sandpaper.
- Mixing:
- Cut off the required amount of SteelStik.
- Knead the putty until the color is uniform.
- Application:
- Apply the putty to the damaged area, pressing firmly.
- Shape the putty as needed.
- Curing:
- Allow 3-5 minutes to set.
- Allow 60 minutes for full cure before machining or finishing.
Compatibility: SteelStik is compatible with most metals. Avoid use on flexible materials. It can be painted after curing.
Care: Store the product in a cool, dry place. Avoid prolonged exposure to direct sunlight.