Art3d Decorative 3D Wall Panels - 20 Pack - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These Art3d 3D wall panels are designed for homeowners and DIY enthusiasts looking to add modern texture and visual interest to interior spaces. The key benefit is their ability to transform accent walls, ceilings, or entire rooms with a contemporary, high-quality look. A minor consideration is that while they are lightweight, proper adhesive and installation techniques are crucial for a lasting finish. This product offers lightweight, fire-resistant PVC panels that are easy to install, cover 19 square feet per box, and can be painted for customization.
All features
| Model Part Number | A10us221WT20usz |
|---|---|
| Brand | Art3d |
Extended Product Information
FAQs
What material are these 3D wall panels made of?
The panels are made of lightweight, fire-resistant PVC.
How much area does one box cover?
Each box contains 20 tiles and covers approximately 19 square feet.
Can I paint these wall panels?
Yes, the matte white finish is designed to be painted, allowing for customization.
Are these panels suitable for bathrooms or kitchens?
They can be used in kitchens, but it's recommended to avoid direct exposure to excessive moisture or grease splatters. For bathrooms, use in areas with less direct water contact and consider sealing the paint if necessary.
What is the best way to install them?
Installation is DIY-friendly. Ensure the wall is clean and dry, use a strong adhesive suitable for PVC, and align panels carefully for a seamless look.
How do I clean the panels?
Clean with a soft, damp cloth. Avoid abrasive cleaners.
What are the dimensions of each tile?
The specific dimensions are not provided in the product details, but they are designed to cover 19 sq. ft. per box of 20 tiles.
Troubleshooting
Panels not adhering well
Ensure the wall surface is properly prepared (clean, dry, smooth). Use a high-quality, appropriate adhesive and apply it evenly. Press panels firmly during installation and allow adequate drying time before disturbing them.
Visible seams between panels
Carefully align the edges of each panel during installation. Use a level to ensure straight lines. Minor gaps can sometimes be filled with paintable caulk after installation and before painting the entire surface.
Panel surface is dirty or smudged
Wipe gently with a damp, soft cloth. For stubborn marks on painted panels, use a mild soap solution and a soft sponge, then rinse with a clean damp cloth.
Paint finish is uneven
Ensure a suitable primer for PVC surfaces was used before painting. Apply paint in thin, even coats rather than one thick coat. Allow sufficient drying time between coats.
Pros and Cons
Pros
- Enhances interior aesthetics with a modern, textured look.
- Lightweight and easy to handle during installation.
- Fire-resistant material for added safety.
- Can be painted to match existing decor or for creative designs.
- Cost-effective way to update wall and ceiling surfaces.
Cons
- Requires proper adhesive for secure and long-lasting mounting.
- May not be suitable for high-moisture environments without proper sealing.
- Installation requires careful alignment for a seamless appearance.
- PVC material might not offer the same acoustic properties as other wall coverings.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface is clean, dry, and smooth. Remove any old wallpaper or paint that is peeling.
- Use a strong, recommended adhesive suitable for PVC panels and your wall material. Apply adhesive evenly to the back of each panel or directly to the wall in sections.
- Press each panel firmly into place, ensuring edges align with adjacent panels for a seamless look. Use a level to ensure straight installation.
- For painted panels, allow adhesive to cure fully before painting. Use a primer suitable for plastics and then apply your chosen paint.
Compatibility:
These panels are best suited for interior walls with standard drywall or plaster finishes. They can also be applied to some wood or concrete surfaces if properly prepared and primed.
Care:
Clean the panels with a soft, damp cloth. Avoid abrasive cleaners or solvents, which could damage the finish or material. For painted surfaces, use gentle cleaning methods appropriate for the paint type.