Uponor Smatrix Wave T-169 Wireless RH Thermostat - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Uponor Smatrix Wave T-169 Wireless RH Thermostat is designed for homeowners and installers managing radiant heating and cooling systems, offering precise temperature control and integrated humidity monitoring for enhanced comfort and system efficiency. Its key benefit lies in its wireless connectivity and digital programmability, allowing for easy integration and sophisticated climate management. A potential caveat is its reliance on the Smatrix Wave control module for full functionality.
All features
| Colour | White |
|---|---|
| Model Part Number | 1087816 |
| Brand | Uponor |
Extended Product Information
FAQs
What is the primary function of the Uponor Smatrix Wave T-169?
It acts as a wireless room sensor to measure and transmit temperature and humidity data to a Smatrix Wave control module for managing radiant heating and cooling systems.
Does this thermostat work with any heating and cooling system?
No, it is specifically designed to work with Uponor Smatrix Wave control modules and radiant heating/cooling systems.
How do I know when to replace the battery?
The Uponor Smatrix Wave control system typically provides a low battery indicator when the CR2032 battery needs replacing.
Can I use this thermostat for humidification control?
This thermostat monitors humidity and can help prevent excessive humidity during cooling, but it does not actively control humidification devices.
What does 'RH' stand for in the product name?
'RH' stands for Relative Humidity, indicating the sensor's capability to measure and report the moisture content in the air.
What is the protection class (IP30)?
IP30 means the device is protected against solid objects larger than 2.5mm (like a wire) and offers no protection against water. It is suitable for dry indoor environments.
How often should I check the humidity settings?
It is recommended to check humidity settings seasonally or if you notice comfort issues, particularly when switching between heating and cooling modes.
Troubleshooting
Thermostat not communicating with control module
Ensure the battery is correctly installed and charged. Check that the room sensor is within the wireless range of the control module. Re-initiate the pairing process according to the Smatrix Wave system manual.
Inaccurate temperature readings
Verify the sensor is not placed near heat sources (lamps, electronics) or in direct sunlight. Ensure the sensor is properly mounted and not obstructed. Allow time for the sensor to acclimate after initial installation or battery change.
Humidity readings seem incorrect
Allow the sensor at least 30 minutes to acclimate to the room's humidity. Ensure the sensor vents are not blocked. Avoid placing the sensor near sources of high humidity like bathrooms or kitchens.
System not responding to setpoints
Confirm that the Smatrix Wave control module is powered and functioning correctly. Check the system settings and ensure the thermostat is assigned to the correct zone. Consult the Smatrix Wave control module's manual for advanced troubleshooting.
Pros and Cons
Pros
- Provides accurate humidity and temperature readings.
- Wireless design simplifies installation and placement flexibility.
- Enhances comfort by managing both temperature and humidity.
- Supports both heating and cooling modes.
- Integrates seamlessly with Uponor Smatrix Wave control modules.
Cons
- Requires a compatible Uponor Smatrix Wave control module to function.
- Limited to specific Uponor Smatrix Wave systems.
- IP30 protection class means it is not suitable for dusty or wet environments.
- Battery life may vary depending on usage and environmental conditions.
Setup, Compatibility & Care
Setup:
- Install the CR2032 battery into the room sensor.
- Ensure the Smatrix Wave control module is properly installed and configured.
- Follow the Smatrix Wave system's pairing procedure to connect the T-169 room sensor wirelessly.
- Mount the sensor on an interior wall, away from direct sunlight or drafts, at a typical occupant height.
Compatibility:
- This thermostat is specifically designed for use with Uponor Smatrix Wave control modules.
- Operates on an 868 MHz frequency.
Care:
- Wipe the exterior with a soft, dry or slightly damp cloth.
- Avoid using abrasive cleaners or solvents.
- Replace the CR2032 battery when indicated by the control system or a low battery warning.