Internal Wall Panel End U Trim - 2400mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Internal Wall Panel End U Trim is the ideal solution for DIY enthusiasts and professional contractors looking to achieve a clean, polished finish on their wall cladding installations. Designed specifically for 10mm thick panels, it effectively caps exposed edges to provide a professional aesthetic and protect the panel core from moisture or damage; however, it is strictly intended for 10mm boards, making it incompatible with thinner or thicker panel alternatives.
All features
| Model Part Number | PICUTA10 |
|---|---|
| Brand | PBSL Group |
Extended Product Information
FAQs
Is this trim suitable for 8mm panels?
No, this trim is specifically designed for 10mm panels. It will be too loose if used with 8mm material.
Can this be used outdoors?
This product is intended for internal wall cladding and is not recommended for external use.
How do I secure the trim to the wall?
While the trim is often held in place by the panel fit, you can use a small amount of neutral cure silicone or panel adhesive to keep it permanently in position.
What is the total length of the trim?
The trim is supplied in a standard 2400mm length.
Can I paint this trim?
These trims are typically finished to match standard panels; painting is generally not recommended as it may affect the surface integrity.
Troubleshooting
Trim feels loose on the panel
Apply a thin bead of silicone sealant or grab adhesive inside the U channel before installation to secure it firmly.
Difficulty cutting the trim
Ensure you are using a sharp, fine-tooth blade and support the material properly to prevent cracking or splintering during the cut.
Pros and Cons
Pros
- Ensures a neat, professional appearance
- Protects exposed panel edges from wear and tear
- Easy to cut to exact size requirements
- Simple friction-fit installation
Cons
- Only compatible with 10mm panels
- Fixed 2400mm length may require cutting for smaller projects
- Limited to 'U' channel profile applications
Setup, Compatibility & Care
To install, measure your vertical edge and mark the trim accordingly. Cut the trim using a hacksaw or a fine-tooth miter saw for a clean finish. Once cut, the trim can be fixed using a high-quality adhesive or by applying a small amount of silicone sealant inside the channel before sliding it over the 10mm panel edge. For long-term care, wipe the trim down with a soft, damp cloth and mild non-abrasive detergent; avoid harsh chemicals that may degrade the surface finish.