Kaiser Grand Chef Gas Hob - Black - KCG 6394 TURBO ROMB

Brighten up your kitchen with this stylish black gas hob. It features four burners, including a po...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to understand and effectively use the Kaiser Grand Chef KCG 6394 Turbo Romb gas hob. This hob is designed for home cooks who want a stylish and efficient cooking surface, offering a powerful turbo burner and convenient features. Note that while the hob is designed for mains gas, it includes nozzles for LPG/Propane conversion, ensuring versatility. This guide will cover everything from setup and maintenance to troubleshooting common issues, ensuring you get the most out of your new gas hob.

All features

ColourBlack
Model Part NumberKCG 6394 TURBO ROMB
BrandKaiser

Extended Product Information

FAQs

How do I switch between natural gas and LPG/Propane?

The hob is preset for natural gas. You must have a qualified gas engineer change the nozzles and adjust the settings if you are using LPG/Propane. The correct nozzles are included with the hob.

Can I use any type of cookware?

Use cookware with a flat bottom that fits the burner size. Avoid using cookware that is too small or unstable on the supports.

What should I do if the flame goes out while cooking?

The flame failure device will automatically cut off the gas supply. Turn off the burner, wait a few minutes, and try to reignite it. If the problem persists, check the gas supply.

Are the cast iron supports dishwasher safe?

Yes, the cast iron supports are dishwasher safe.

How do I clean the glass surface?

Wipe the glass surface with a damp cloth and mild detergent. Avoid using abrasive cleaners or steel wool.

Where can I find replacement parts?

Contact Kaiser customer service or an authorized dealer for replacement parts.

What is the warranty period?

The Kaiser Grand Chef KCG 6394 Turbo Romb has a 2-year warranty.

Troubleshooting

Burner won't ignite

Check the gas supply and ensure the burner cap is correctly positioned. Ensure the electrical connection is secure. If using LPG/Propane, confirm the correct nozzles are installed.

Flame is too low or unstable

Clean the burner ports with a needle or thin wire to remove any blockages. Ensure the gas supply pressure is adequate.

Hob not working after cleaning

Make sure all parts are completely dry before reassembling. Check that the burner caps are correctly positioned.

Electronic ignition not working

Check the electrical connection and ensure the hob is plugged in. Replace the batteries, if applicable.

Pros and Cons

Pros

  • Powerful turbo burner for high-heat cooking and wok use.
  • Durable and dishwasher-safe cast iron supports for easy cleaning.
  • Includes a wok adapter for added cooking versatility.
  • Flame failure device enhances safety.
  • Stylish black glass design complements modern kitchens.
  • Easy-to-use front controls with electronic ignition

Cons

  • Requires professional installation for gas connection.
  • Cleaning the glass surface may require specific cleaning agents to avoid streaks.
  • The turbo burner can be too powerful for delicate cooking tasks if not carefully controlled.
  • May require adapting to the front control type if you are not used to it.

Setup, Compatibility & Care

  1. Installation: The gas hob must be installed by a qualified gas engineer. Ensure that the gas supply is compatible with the hob (natural gas or LPG/Propane, using the provided nozzles if needed).
  2. Electrical Connection: The hob requires a 230V, 50 Hz electrical connection for the electronic ignition.
  3. Compatibility: The hob is designed to be built-in, so ensure your countertop cutout dimensions match the hob's specifications (W x 56 cm, D x 49 cm).
  4. Cleaning: Clean the glass surface with a damp cloth and mild detergent. Avoid abrasive cleaners.
  5. Cast Iron Supports: Remove the cast iron supports and wash them in the dishwasher or by hand with warm, soapy water.
  6. Wok Adapter: Clean the wok adapter with warm, soapy water. Ensure it is completely dry before placing it back on the hob.
  7. Knobs: Clean the control knobs with a damp cloth. Do not use harsh chemicals.