Spacepro Classic Sliding Wardrobe Kit and Mirror - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Spacepro Classic Sliding Wardrobe Kit and Mirror is designed for homeowners looking to maximize storage and enhance room aesthetics by optimizing wardrobe space. Its primary benefit is freeing up floor space by replacing traditional hinged doors with sleek sliding ones, potentially saving up to 500mm. A key consideration is that framing kits, end panels, and interior storage solutions are sold separately and required for a complete installation.
All features
| Colour | White |
|---|---|
| Model Part Number | ISP-304-3037-KT |
| Brand | Spacepro |
Extended Product Information
FAQs
What are the exact dimensions of the opening this kit is designed for?
The kit is ideal for an aperture of 2260mm (Height) x 2978mm (Width).
Do I need to buy anything else for a complete installation?
Yes, framing kits, end panels, and interior storage solutions are sold separately and are required for a complete wardrobe system.
How easy is it to install?
The kit is designed for easy installation and can typically be fitted in a matter of hours by a DIY enthusiast.
What is the warranty on this product?
There is a 10-year manufacturer's guarantee on all moving parts, subject to terms and conditions.
Can the track be cut to fit smaller openings?
Yes, the included track set is designed to be easily cut to size to fit your specific opening dimensions.
What materials are the doors made from?
The doors are constructed from Steel, MFC (Melamine Faced Chipboard), and Glass.
Can I mix and match door finishes?
This specific kit includes a combination of mirror and white panels. Individual door purchases or other Spacepro kits may offer different combinations or single finishes.
Troubleshooting
Doors are difficult to slide.
Check the tracks for obstructions like dust, dirt, or debris. Clean the tracks thoroughly. Ensure the doors are correctly seated on the tracks and are not binding against the frame.
Doors are not hanging straight.
Adjust the leveling screws or mechanisms on the door hangers as per the installation guide. Ensure the top and bottom tracks are parallel and securely fixed.
Track set is too long/short.
The included track set is designed to be cut to size. Use appropriate tools to trim the tracks to the exact width required for your opening. If significantly too short, you may need to purchase additional track components.
Components seem missing.
Carefully review the packaging contents against the parts list in the installation manual. Contact customer support if specific components are genuinely missing.
Pros and Cons
Pros
- Significantly increases storage accessibility by using sliding doors.
- Saves substantial floor space compared to standard hinged doors.
- Offers a modern and versatile aesthetic with mirror and white panel options.
- Includes necessary track hardware for installation.
- Relatively easy to install for DIY enthusiasts.
- Backed by a 10-year guarantee on moving parts.
Cons
- Framing kits, end panels, and interior storage are not included and must be purchased separately.
- The overall cost can increase significantly when adding essential companion products.
- Requires precise measurements for track cutting and door alignment.
- Mirror panels can be prone to smudges and require regular cleaning.
- Not suitable for very small wardrobe openings where even the sliding mechanism needs clearance.
Setup, Compatibility & Care
Setup:
- Measure your wardrobe opening accurately to determine if any track adjustments are needed. The included track set can be cut to size.
- Install the top and bottom tracks according to the provided instructions, ensuring they are level and securely fastened.
- Mount the sliding doors onto the tracks. The traditional frame design with a curved profile facilitates easy handling during this step.
- Ensure doors hang plumb and adjust if necessary.
Compatibility:
- This kit is designed for an ideal aperture of 2260mm (Height) x 2978mm (Width).
- For a complete installation, you will need to purchase Spacepro framing kits, end panels, and interior storage solutions separately.
Care:
- Clean mirror panels with a soft, damp cloth and a mild glass cleaner. Avoid abrasive materials.
- Wipe down the white panels and frames with a slightly damp cloth. Dry thoroughly.
- Periodically check that the tracks are free from dust and debris to ensure smooth operation. A vacuum cleaner with a brush attachment can be helpful.