PlastiKote Radiator Paint - Satin White 400ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you effectively use PlastiKote Radiator Paint to refresh your radiators and heating pipes. It's ideal for homeowners looking for a fast-drying, durable finish. However, keep in mind that the coverage is up to 1.75m² per can, so calculate your needs accordingly. This guide will cover key features, usage tips, and troubleshooting to ensure a professional result.
All features
| Colour | White |
|---|---|
| Model Part Number | 071017 |
| Brand | PlastiKote |
Extended Product Information
FAQs
How much coverage does one can provide?
One 400ml can provides coverage of up to 1.75m².
How long does it take for the paint to dry?
The paint is touch-dry in approximately 10 minutes.
Can I use this paint on other surfaces?
While designed for radiators and heating pipes, ensure compatibility with the specific surface before applying.
What is the heat resistance of this paint?
The paint resists heat up to 110°C.
How do I clean the painted surface?
Wipe the painted surface with a damp cloth. Avoid using abrasive cleaners.
What should I do if the paint clogs the nozzle?
Clean the nozzle with a pin or wire. If the problem persists, replace the nozzle or use a new can.
Does this paint require a primer?
Generally, a primer is not required if the surface is properly prepared. However, if the surface is particularly old or rusted, a primer may improve adhesion.
Troubleshooting
Paint is running or dripping.
Apply thinner coats and ensure the can is held the correct distance from the surface. Avoid spraying too much paint in one area.
Paint is not drying properly.
Ensure adequate ventilation and allow sufficient drying time between coats. The humidity may also affect the drying.
Uneven finish or brush marks.
This paint is designed for aerosol application. Make sure the nozzle is clean and spray evenly. Avoid holding the can too close to the surface, and ensure there's no wind.
Poor adhesion.
Properly prepare the surface by cleaning, sanding, and removing any loose paint or rust. Ensure the surface is completely dry before painting.
Pros and Cons
Pros
- Quick drying time minimizes downtime.
- Non-yellowing formula ensures a lasting finish.
- Heat resistance protects against radiator temperatures.
- Durable, scratch-resistant finish for longevity.
- Easy application eliminates the need for brushes and complicated techniques.
Cons
- Coverage is limited to 1.75m² per can, requiring multiple cans for larger projects.
- Aerosol application may require masking to protect surrounding areas.
- Proper ventilation is necessary during application.
- Color options are limited to satin white.
- Requires proper surface preparation for optimal results.
Setup, Compatibility & Care
- Preparation:
- Ensure the radiator is cool and turned off.
- Clean the surface thoroughly, removing any loose paint, rust, or grease.
- Lightly sand the surface for better adhesion.
- Mask off surrounding areas to protect them from overspray.
- Application:
- Shake the can well for at least one minute before use.
- Hold the can 10-12 inches from the surface and spray in even, sweeping motions.
- Apply multiple thin coats rather than one thick coat, allowing each coat to dry for about 10 minutes.
- Compatibility:
- Suitable for use on radiators and heating pipes.
- Compatible with most metal surfaces.
- Care:
- Wipe clean with a damp cloth.
- Avoid using abrasive cleaners or solvents.
- Ensure the paint is fully cured before exposing the radiator to high heat.