Carlube Lithium Grease Lubricant Extreme Performance Cartridge 500G - EP2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Carlube Lithium EP2 Grease is designed for automotive and industrial users seeking a high-performance lubricant for demanding bearing applications. Its key benefit is exceptional protection under extreme pressure, high shock loads, and high temperatures, preventing wear and extending component life. A potential caveat is its specific NLGI 2 rating, which may not be suitable for all grease applications.
All features
| Model Part Number | EP2 |
|---|---|
| Brand | Carlube |
Extended Product Information
FAQs
What does 'EP2' stand for?
'EP' stands for Extreme Pressure, indicating the grease's ability to withstand high loads. '2' refers to the NLGI (National Lubricating Grease Institute) consistency number, where 2 is a common medium consistency suitable for many applications.
Can this grease be used for general-purpose automotive lubrication?
While it is multi-purpose, its 'Extreme Performance' designation makes it particularly suited for high-load and high-temperature applications. For less demanding general lubrication, other greases might be more appropriate, but this grease will generally perform well.
How often should I re-grease bearings with this product?
The frequency depends heavily on the application, operating conditions, and manufacturer recommendations. Consult your equipment's manual for specific lubrication intervals. Heavy-duty or wet environments may require more frequent re-greasing.
What is the operating temperature range of this grease?
This Carlube Lithium EP2 Grease operates effectively within a temperature range of -15°C to 120°C.
Will this grease help with noisy brakes?
Yes, this grease is noted to help prevent disc brake squeal. A small amount can be applied to the back of brake pads or caliper contact points as per brake service guidelines.
How should I store the remaining grease in the cartridge?
Store the cartridge in a cool, dry place, ensuring the outlet is capped or covered to prevent contamination and drying. Keep it away from direct sunlight.
Troubleshooting
Grease appears dry or stiff.
This can occur if the product has been stored for a prolonged period or exposed to high temperatures. Ensure proper storage conditions. If severely degraded, replacement may be necessary.
Grease is leaking from the bearing seal.
Ensure the correct amount of grease has been applied; over-greasing can force lubricant past seals. Check that bearing seals are intact and functioning correctly. Verify that the correct NLGI grade grease is being used.
Poor lubrication or premature wear is observed.
Verify that the grease is being applied at the recommended intervals and quantities. Check for contamination of the grease or bearing. Ensure the operating temperature and load conditions do not exceed the grease's capabilities.
Pros and Cons
Pros
- Excellent protection against high shock loads and extreme pressures.
- Maintains performance across a wide temperature range.
- Resistant to water washout and oxidation for longevity.
- Helps reduce noise in specific applications like disc brakes.
- Multi-purpose suitability for various bearing types.
Cons
- Not suitable for all grease applications; NLGI 2 rating is specific.
- Requires proper application method to be effective.
- Performance may vary in extremely low temperatures below -15°C.
Setup, Compatibility & Care
This grease is supplied in a 500g cartridge, typically designed for use with a standard grease gun. Ensure the grease gun is clean before loading the cartridge to prevent contamination.
Compatibility:
- Primarily designed for automotive and industrial ball, roller, and plain bearings.
- Suitable for applications requiring an NLGI 2 Lithium Grease.
- Generally compatible with most standard bearing materials, but always consult equipment manufacturer specifications.
Care and Maintenance:
- Store the product in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the cartridge sealed when not in use to prevent contamination and drying out.
- Apply grease according to equipment manufacturer recommendations for frequency and quantity.
- Clean any excess grease from around the application area after lubrication.
- Avoid mixing with other types of greases unless compatibility is confirmed, as this can degrade performance.