Splashwall Brushed Effect Laminate & Mdf Splashback - 600mm H x 2440mm W x 10mm T
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and renovators looking to enhance their kitchen with the Splashwall Brushed Effect Laminate & MDF Splashback. It offers a stylish and practical solution to protect your walls from splashes, serving as a viable alternative to glass or tiles. Please note that while the splashback is easy to install, professional help might be needed for precise cutting and fitting around specific kitchen features.
All features
| Brand | Splashwall |
|---|
Extended Product Information
FAQs
What tools do I need for installation?
You'll need a measuring tape, pencil, saw, level, adhesive or screws, silicone sealant, and a damp cloth.
Can I install this myself?
Yes, with basic DIY skills. However, professional installation is recommended for complex cuts and layouts.
How do I clean the splashback?
Wipe with a damp cloth and mild detergent. Avoid harsh chemicals or abrasive cleaners.
Is the splashback heat resistant?
It is not recommended to be exposed to direct heat from a hob. Maintain a safe distance.
Can I cut the splashback to fit around sockets and switches?
Yes, but precise measurements and cutting are required. Use appropriate tools and take safety precautions.
What is the warranty on the Splashwall splashback?
Warranty information is not available in the provided product details. Please refer to your purchase documentation.
Is the splashback waterproof?
While water-resistant, it is essential to seal the edges with silicone to prevent water penetration.
What is the thickness of the splashback?
The Splashwall Brushed Effect Laminate & MDF Splashback is 10mm thick.
Troubleshooting
Splashback does not adhere to the wall.
Ensure the wall surface is clean and dry. Use a high-quality adhesive recommended for MDF and follow the manufacturer's instructions for application.
Water seeping behind the splashback.
Check the silicone sealant along the edges and reseal if necessary. Ensure there are no gaps.
Surface scratched or damaged.
Avoid using sharp objects or abrasive cleaners. Consider replacing the damaged section.
Pros and Cons
Pros
- Easy to clean and maintain, ideal for busy kitchens.
- Offers a stylish and modern aesthetic.
- Provides robust protection against splashes and stains.
- Cost-effective alternative to tiles or glass.
- Simple to install with basic DIY skills.
- Durable MDF construction ensures longevity.
Cons
- Requires precise measurements and cutting for a perfect fit.
- May require professional installation for complex kitchen layouts.
- Susceptible to damage from sharp objects.
- Not suitable for direct heat exposure.
- Seams may be visible depending on installation.
- Limited color and design options compared to tiles.
Setup, Compatibility & Care
Setup
- Preparation: Measure the area where the splashback will be installed. Ensure the wall surface is clean, dry, and level.
- Cutting: Measure and cut the splashback to the required size, using appropriate tools (e.g., a fine-toothed saw).
- Installation: Apply adhesive or use screws to secure the splashback to the wall. Follow the manufacturer's instructions for adhesive or screw placement.
- Sealing: Seal the edges with silicone sealant to prevent water from penetrating behind the splashback.
Compatibility
The Splashwall splashback is compatible with most kitchen designs. Ensure it is not exposed to direct heat from the hob.
Care
- Wipe the surface regularly with a damp cloth and mild detergent.
- Avoid abrasive cleaners or scouring pads, which can damage the surface.
- Immediately wipe up any spills to prevent staining.