Air Brake And Clutch Bleeder - AB Tools - BPT229
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This AB Tools Air Brake and Clutch Bleeder (BPT229) is designed for automotive professionals and DIY enthusiasts needing to perform brake bleeding or full fluid system replacement. Its key benefit is enabling single-person operation for a quick, clean, and efficient fluid flush, powered by your existing air compressor. A potential caveat is the need for an air compressor to operate.
All features
| Model Part Number | BPT229 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
Can I use this brake bleeder without an air compressor?
No, this brake and clutch bleeder specifically requires an air compressor to generate the necessary vacuum for operation. It is not a manual or electric vacuum pump.
What is the maximum air pressure recommended for this tool?
The recommended air requirement is between 90 to 120 PSI (6 to 12 Bar) for optimal performance and vacuum generation.
How do I choose the correct master cylinder adapter?
The kit includes four adapters with different size ranges. Measure the opening of your master cylinder reservoir and select the adapter that provides the most secure and complete seal.
Can this tool be used for clutch systems as well as brakes?
Yes, the product description states it is ideal for both brake bleeding and full replacement of fluid in brake or clutch systems.
What is the capacity of the collection bottles?
The unit has a 1-liter capacity reservoir bottle and a 0.75-liter capacity suction bottle.
Is it possible to flush the entire brake system with this tool?
Yes, the tool is designed to flush and refill the entire brake system by yourself, drawing fluid from the bleed nipple.
Does this tool require specialized brake reservoir caps?
No, it does not require specialized brake reservoir caps, making it more versatile.
Troubleshooting
No vacuum is being generated
Check that the air compressor is turned on and supplying adequate pressure (90-120 PSI). Ensure the 1/4" BSP air inlet is securely connected and not leaking. Verify that the suction hose is correctly placed on the bleed nipple and is not kinked or blocked.
Fluid is leaking around the master cylinder adapter
Ensure you have selected the correct size adapter for your master cylinder. Try seating the adapter more firmly. If the leak persists, inspect the adapter for damage or consider using a temporary seal (if safe and appropriate for your vehicle's system).
Slow fluid flow or incomplete bleed
Confirm sufficient air pressure is being supplied. Check the suction bottle and the hose for any blockages. Ensure the bleed nipple is fully open during the bleeding process.
Device is not drawing fluid effectively
Double-check the air pressure settings and connections. Ensure the master cylinder reservoir has sufficient fluid to prevent air from being drawn into the system. Clean any potential obstructions in the suction hose or bleed nipple.
Pros and Cons
Pros
- Enables single-person brake bleeding and fluid changes.
- Quick and efficient operation using an air compressor.
- Wide compatibility with various vehicle master cylinders via included adapters.
- Minimizes mess and fluid spillage.
- Suitable for both light-duty and professional use.
Cons
- Requires an air compressor to operate.
- May require additional adapters for extremely specific or older vehicle master cylinders.
- Initial setup and understanding of air pressure settings is necessary.
Setup, Compatibility & Care
Setup: Connect the air inlet (1/4” BSP) to your air compressor, ensuring the pressure is regulated between 90-120 PSI (6-12 Bar). Select the appropriate master cylinder adapter from the included set (sizes range from 21mm-30mm to 32mm-41mm) and fit it securely to the master cylinder reservoir. Place the suction hose into the bleed nipple and the reservoir bottle nearby. The unit features a 1-liter reservoir for clean fluid and a 0.75-liter suction bottle for old fluid.
Compatibility: This bleeder is designed for use with most vehicle types. The included 4 master cylinder insert adapters are intended to fit a wide range of manufacturers. It requires a standard 1/4” BSP air inlet connection and an air compressor capable of delivering 90-120 PSI.
Care: After each use, empty and clean both the reservoir and suction bottles thoroughly with a suitable cleaner or soap and water. Ensure all hoses are clear of blockages. Store the unit in a dry place. Periodically check the air connections for leaks and ensure the adapters are clean.