AK Interactive RLM 76 Real Colours Acrylic Paint Marker - RCM026
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This AK Interactive acrylic paint marker is designed for modelers seeking a fast-drying, waterproof, and highly precise way to apply paint to plastic, resin, metal, and wood surfaces. Its key benefit is the ability to achieve clean, comfortable, and accurate base coats or camouflage details that are resistant to subsequent weathering. A potential caveat is its specialized formulation, which may require specific handling for optimal results.
All features
| Model Part Number | RCM026 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
Can I use this marker on bare metal parts?
Yes, the marker is formulated to grip plastic, resin, metal, and wooden surfaces effectively.
How long does the paint take to dry?
The paint is fast-drying, but drying times can vary based on application thickness and environmental conditions. It is generally ready for recoating or weathering within minutes to an hour.
Will weathering products remove the paint?
No, once the paint is fully dry, it is resistant to most standard modeling weathering products, preventing it from blurring or lifting.
Can I thin this marker paint?
While designed for direct application, it can typically be thinned slightly with water or a dedicated acrylic thinner for airbrushing if needed, but test on a scrap piece first.
What is the best way to store the marker?
Store the marker horizontally or vertically with the cap securely on, in a cool, dry place away from direct sunlight.
Can I use this for base coating entire models?
It is ideal for base coating small scales or specific areas/details. For larger areas on bigger models, airbrushing or brush painting might be more efficient.
Troubleshooting
Marker not dispensing paint
Shake the marker vigorously for 1-2 minutes. Prime the tip by pressing it onto a surface until paint flows consistently. Ensure the cap was securely on when stored.
Paint flow is inconsistent or sputtering
Continue shaking the marker. Try priming the tip again. If issues persist, the internal mixing ball might be stuck; try gently tapping the marker tip first.
Color appears too thin or translucent
Allow the first coat to dry completely, then apply a second coat. Ensure the marker was adequately shaken before use for optimal pigment distribution.
Tip has dried out or become clogged
Gently clean the tip with a damp cloth or paper towel. You can try re-priming the marker. For stubborn clogs, carefully rinse the tip under water and allow it to dry before re-priming.
Pros and Cons
Pros
- Excellent adhesion to a variety of modeling surfaces.
- Fast drying time minimizes wait between coats or applications.
- Waterproof and resistant to weathering products for durable finishes.
- Precise application ideal for detail work and small-scale projects.
- High coverage ensures vibrant colors and efficient use.
Cons
- Marker tip may wear down with extensive use on rough surfaces.
- Requires proper surface preparation for optimal adhesion.
- Specific color formulation might not suit all modeling needs.
- May require shaking and priming before first use, typical of paint markers.
Setup, Compatibility & Care
Setup: Before first use, shake the marker vigorously for at least one minute to thoroughly mix the paint. Press the tip down onto a suitable surface (like scrap plastic or paper) and hold for a few seconds to prime the nib and allow the paint to flow. If the paint flow is inconsistent, repeat this priming process.
Compatibility: This marker is designed for use on plastic, resin, metal, and wood model surfaces. It is compatible with most acrylic-based modeling paints and weathering products once fully dry. Avoid using aggressive thinners that may react with the acrylic formulation.
Care: Store the marker cap-on in a cool, dry place away from direct sunlight. If the tip becomes clogged or dry, gently clean it with a damp cloth or paper towel. You can also try re-priming the marker as described in the setup section. Ensure the cap is securely fastened after each use to prevent the paint from drying out.