Wheel Bearing Lithium Grease Multi Purpose Lubricant Spray - K2 - W135
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The K2 W135 Lithium Grease is an essential maintenance solution for automotive, industrial, and agricultural professionals looking to extend the service life of high-stress mechanical components. This high-adhesion spray provides superior resistance to moisture, oxidation, and heavy shocks, ensuring consistent lubrication for bearings, joints, and cables. While it excels at preventing friction in complex assemblies, users should be aware that the high-tack formula requires a few minutes to set to its optimal consistency before it reaches peak performance.
All features
| Model Part Number | W135 |
|---|---|
| Brand | K2 |
Extended Product Information
FAQs
Can I use this on plastic components?
Yes, it is generally safe for most automotive plastics, but always test a small, inconspicuous area first.
Does this grease wash off with water?
No, it is specifically formulated to be resistant to moisture and water washout.
Is it safe for high-speed bearings?
Yes, its stability under centrifugal force makes it excellent for high-speed roller and ball bearings.
Do I need to wipe off the excess?
While it is designed to stick, it is best practice to wipe away any excess overspray with a clean rag after application.
How long does the protection last?
Longevity depends on usage conditions, but its high-adhesion properties generally ensure longer intervals between re-applications compared to standard oils.
Can I use this in freezing temperatures?
It is designed to maintain its consistency in varied conditions, but always ensure mechanical parts are free of ice before application.
Troubleshooting
Spray is inconsistent or clogging
Remove the straw and clear it with compressed air or replace it, then clear the nozzle tip with a cloth.
Grease is running off the surface
The surface may be too cold or dirty. Clean the surface thoroughly and ensure it is dry before re-applying.
Can pressure seems low
Ensure the can is at room temperature; cold temperatures can affect the internal propellant pressure.
Pros and Cons
Pros
- Excellent resistance to washout and moisture
- Does not drip or run on vertical surfaces
- Reduces wear and friction effectively
- Includes a precision applicator for tight spots
- Suitable for diverse automotive and industrial uses
Cons
- Requires a short wait time to reach optimal consistency
- Highly adhesive formula can be difficult to clean off skin
- Not intended for non-bearing sliding surfaces where dust accumulation is a risk
Setup, Compatibility & Care
Before application, ensure the target surface is clean and free of old, contaminated grease or debris to maximize adhesion. Shake the K2 W135 can vigorously for at least 30 seconds to ensure the lithium components are properly mixed. Attach the precision straw for hard-to-reach areas. Apply a moderate, even coat to the friction point. Allow the lubricant to set for 3 to 5 minutes so it can reach its final, stable consistency. Store the can in a cool, dry place and ensure the cap is replaced to prevent the applicator from clogging.