Connect Taper Tap & Plug Tap Set - M12 x 1.5 - 2 Piece Set
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Connect Taper Tap & Plug Tap Set is designed for tradespeople and businesses requiring precise M12 x 1.5 threading. Its key benefit is providing both a taper and plug tap for creating and finishing threads in a single, durable alloy steel set. A potential caveat is its specific M12 x 1.5 size, making it suitable only for applications matching this thread standard. The set includes two essential taps made from robust alloy steel and comes conveniently packaged in a plastic case for storage and transport. It is also a component of the comprehensive Laser Tap & Die set 4554A.
All features
| Model Part Number | 37085 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What is the difference between a taper tap and a plug tap?
A taper tap has a chamfered end that gradually cuts the thread, making it easier to start. A plug tap has a shorter chamfer and is used after the taper tap to complete the thread to its full depth and create a clean finish.
What material are these taps made from?
These taps are made from durable alloy steel, which provides strength and longevity for repeated use.
Can I use this set for other thread sizes?
No, this set is specifically designed for M12 x 1.5 threads only. For other sizes, you would need a different tap set.
How do I clean and maintain the taps?
Clean the taps with a brush and degreaser after each use to remove metal filings and cutting fluid. Store them in their provided plastic case to protect the cutting edges.
Is this set suitable for hard metals?
While made of alloy steel, use caution and appropriate cutting fluids when tapping very hard metals. Proper technique and lubrication are crucial for success.
What does M12 x 1.5 mean?
M12 refers to the nominal diameter of the thread, which is 12 millimeters. The '1.5' refers to the pitch, which is the distance between the thread crests (1.5 mm in this case).
Troubleshooting
Tap breaks during use
Ensure you are using sufficient lubrication, turning the tap correctly (forward two turns, back one), and not forcing it. Check that the pilot hole size is correct and that you are not trying to tap too hard a material without proper technique.
Poor thread quality
Verify that the correct tap size (M12 x 1.5) is being used. Ensure the tap is held perfectly perpendicular to the workpiece. Clean the tap flutes as they can become clogged with material.
Tap gets stuck
Apply more cutting fluid and try to gently back the tap out using the tap wrench. Avoid excessive force which can cause breakage.
Pros and Cons
Pros
- Durable alloy steel construction for extended tool life.
- Includes both taper and plug taps for complete thread formation.
- Comes in a protective plastic case for convenient storage.
- Specific M12 x 1.5 sizing is ideal for relevant automotive and engineering tasks.
- Part of a larger, comprehensive tool system (Laser Tap & Die set 4554A).
Cons
- Limited to M12 x 1.5 thread size; not versatile for other thread pitches.
- Requires precise application; improper use can damage threads or the workpiece.
- Sold as a set, individual tap replacement might require purchasing another set if lost.
Setup, Compatibility & Care
Setup: Ensure the hole is drilled to the correct pilot diameter for M12 x 1.5 threads before using the taps. Apply appropriate cutting fluid or lubricant to the tap and the workpiece, especially when working with harder metals. Start the taper tap by hand, ensuring it is perpendicular to the surface. Once the thread is started, use a tap wrench to slowly advance the tap, turning it forward two full turns and then backward one-quarter turn to break the chip.
Compatibility: This set is specifically for M12 x 1.5 threads. It is designed for use with Connect part numbers 37021A & 37022A and is included in the Laser Tap & Die set 4554A.
Care: After each use, clean the taps thoroughly to remove any metal chips or cutting fluid residue. Store the taps in their original plastic case to protect the cutting edges from damage. Periodically inspect the taps for any signs of wear or damage.