UniBond No More Nails Crystal Clear Grab Adhesive - 87ml (2 Pack)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a strong, discreet adhesive solution. The UniBond No More Nails Crystal Clear Grab Adhesive offers a powerful, invisible bond for a wide range of materials, making it ideal for clean, professional finishes. Its main caveat is the 24-hour full cure time, requiring patience for maximum strength.
All features
| Brand | UniBond |
|---|
Extended Product Information
FAQs
How long does it take for the adhesive to fully cure?
The adhesive will fully cure in at least 24 hours, providing maximum bond strength.
Can I use this adhesive outdoors?
Yes, UniBond No More Nails Crystal Clear is weather resistant and suitable for outdoor use.
What surfaces is this adhesive suitable for?
It is suitable for mirror, wood, ceramic, tiles, cork, steel, stone, plaster, concrete, brick, glass, and most plastics.
How much adjustment time do I have?
You have approximately 15 minutes for adjustment after applying the adhesive.
Can this adhesive fill gaps?
Yes, it can fill gaps up to 20mm.
What is the temperature range for this adhesive?
The adhesive performs between -30°C and +70°C.
How should I store the adhesive after opening?
Store tubes in a cool, dry place with the cap securely fastened to prevent drying out.
Troubleshooting
Adhesive not dispensing
Ensure the tube seal is fully punctured and the nozzle is clear of obstruction. Check if the tube is expired.
Poor adhesion
Verify that surfaces were clean, dry, and free of dust or grease. Ensure sufficient adhesive was applied and surfaces were pressed together firmly. Check cure time has passed.
Bond failure over time
Ensure the materials are compatible and the environmental conditions (temperature, moisture) are within the product's specified range. Reapply if surfaces were not properly prepared.
Difficulty removing excess uncured adhesive
Wipe away immediately with a damp cloth. For stubborn residue, use a suitable solvent cautiously on a test area first.
Pros and Cons
Pros
- Invisible bond for aesthetic applications.
- Strong initial grab reduces need for fasteners.
- Suitable for a wide variety of materials.
- Durable and weather-resistant for indoor/outdoor use.
- Convenient 2-pack for value and multiple uses.
Cons
- Requires 24 hours for full cure.
- Adjustment time is limited to 15 minutes.
- May not be suitable for all plastics.
Setup, Compatibility & Care
Setup:
- Ensure surfaces are clean, dry, and free from dust, grease, and loose material.
- Puncture the tube seal using the cap or a suitable tool.
- Apply the adhesive in a zig-zag pattern to one surface, or in dabs for heavier items.
- Position the items immediately and press firmly. For heavier items, temporary support may be needed until the adhesive cures.
- Allow approximately 24 hours for full cure. Avoid disturbing the bonded items during this period.
Compatibility:
Suitable for most common building materials including: mirror, wood, ceramic, tiles, cork, steel, stone, plaster, concrete, brick, glass, and most plastics. Test on a small, inconspicuous area first if unsure, especially with plastics.
Care:
Store tubes in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is securely fastened after use to prevent the adhesive from drying out.