Acrylic Wall Panel - 896mm x 2400mm x 4mm - Black Geo
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Shower Wall Acrylic Wall Panel in Black Geo is designed for homeowners and contractors seeking a modern, low-maintenance alternative to traditional bathroom tiling. These panels provide a sophisticated, glass-like finish that is 100% waterproof and remarkably easy to install directly over existing surfaces; however, users should ensure their substrate is perfectly flat and plumb to avoid any visible bowing in the thin 4mm material.
All features
| Model Part Number | SWSCA01900 |
|---|---|
| Brand | Shower Wall |
Extended Product Information
FAQs
Can I install these panels over uneven walls?
It is not recommended. The 4mm thickness makes the panel flexible, meaning it will follow the contour of the wall. Ensure the wall is flat before installation.
Do I need special tools to cut the panels?
No, standard power tools such as a circular saw or jigsaw with a fine-toothed blade work perfectly for acrylic panels.
Are these panels suitable for use inside the shower enclosure?
Yes, they are 100% waterproof and specifically designed for use in showers, wet rooms, and around baths.
How do I clean the panels?
Use a soft cloth and warm soapy water. Avoid abrasive sponges, steel wool, and chemical cleaners that could damage the glossy finish.
Is the 30-year guarantee transferable?
Guarantees are typically provided to the original purchaser for domestic use; please refer to the specific documentation provided with your product for full terms.
Can I use these panels in a kitchen?
While intended for bathrooms, they are suitable for use as hygienic wall cladding in various interior applications, provided they are not placed in direct contact with an open flame or extreme heat sources.
Troubleshooting
Panel appears bowed after installation
Check that the underlying wall surface is completely flat; if not, use a leveling compound or board before panel attachment.
Edges are not sealed properly
Ensure that the gaps between panels are cleaned thoroughly before applying the recommended color-matched sealant.
Visible scratches on the surface
Use an acrylic-safe plastic polish and a microfiber cloth to gently buff out minor surface-level imperfections.
Pros and Cons
Pros
- Significantly faster installation compared to ceramic tiling
- No grout lines to scrub or maintain
- Can be installed over existing bathroom tiles
- High-end visual impact with a reflective glass-like surface
- Extremely durable and long-lasting material
Cons
- Requires a perfectly flat surface for best results
- Thin material may highlight imperfections in the wall behind it
- Glossy finish may show water spots or fingerprints more easily than matte surfaces
- Large panel size (896mm x 2400mm) may be difficult to handle for a single person
Setup, Compatibility & Care
To install, ensure your walls are dry, flat, and stable. While the panels can go over tiles, any loose tiles must be removed and the holes filled to create a flush surface. Use manufacturer-recommended color-matched sealants at all joints to maintain the 100% waterproof seal. For cutting, standard woodworking tools are sufficient, though a fine-tooth blade is recommended to prevent chipping the acrylic edge. For daily care, simply wipe down the panels with a soft cloth and a mild non-abrasive detergent; avoid scouring pads or harsh chemicals like bleach, which can dull the surface finish over time.