CTEK CS One GEN 2 Motorcycle Motorbike Battery Charger & Maintainer
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The CTEK CS One GEN 2 is designed for motorcycle owners seeking advanced, hassle-free battery charging and maintenance for their 12V lead-acid or lithium (LiFePO₄) batteries. Its key benefit is total remote control and monitoring via Wi-Fi and Bluetooth through the CTEK App, ensuring optimal battery health from anywhere. A potential caveat is the reliance on Wi-Fi connectivity for full remote features.
All features
| Model Part Number | 40-702 |
|---|---|
| Brand | CTEK |
Extended Product Information
FAQs
Can I use the CTEK CS One GEN 2 with my car battery?
The CS One GEN 2 is optimized for motorcycle batteries. For car batteries, CTEK offers chargers specifically designed for their larger capacity and different charging requirements.
What is the benefit of Wi-Fi connectivity?
Wi-Fi connectivity allows you to monitor the charging status, battery health, and receive notifications remotely via the CTEK App, even when you are not near your vehicle.
How do I reset the Wi-Fi connection?
Consult the CTEK App or the product manual for instructions on how to reset the Wi-Fi settings. This usually involves a specific button press combination or a function within the app.
Is it safe to leave the charger connected all the time?
Yes, the CS One GEN 2 is designed for long-term battery maintenance. Its adaptive charging technology ensures the battery is kept at an optimal charge level without overcharging.
What does the 'RECOND' mode do?
The RECOND mode is specifically for lead-acid batteries. It applies a controlled charge to break down sulfate crystals that can form on the battery plates, helping to restore lost capacity.
Can this charger be used in wet conditions?
The CTEK CS One GEN 2 is designed for use in a variety of conditions, but it should be protected from direct rain or submersion in water. Ensure it is used in a well-ventilated area.
What warranty does the CTEK CS One GEN 2 come with?
Please refer to the product documentation or CTEK's official website for the most current warranty information, as terms can vary by region.
Troubleshooting
Charger not powering on
Verify the charger is securely plugged into a working mains power outlet. Check the power cable for any damage.
App cannot connect to the charger
Ensure your smartphone's Wi-Fi and Bluetooth are enabled. Check that the charger is within Wi-Fi range and powered on. Restart the charger and your smartphone. Re-pair the device via the CTEK App if necessary.
Battery not charging
Confirm the clamps are making good contact with the battery terminals. Check that the battery voltage is within the charger's operating range (typically above 2V for lead-acid and 5V for lithium). Ensure the battery is compatible with the charger (12V lead-acid or LiFePO₄).
Charger shows an error code
Refer to the CTEK App or the product manual for specific error code meanings and recommended actions.
Pros and Cons
Pros
- Provides complete remote control and monitoring via a smartphone app.
- Automatically adapts to different battery types (lead-acid and lithium) and conditions.
- Simple, error-proof setup with spark-free, polarity-free clamps.
- Offers advanced battery recovery and maintenance functions.
- Award-winning design with enhanced connectivity.
Cons
- Full remote functionality depends on stable Wi-Fi connection.
- May be overkill for users who only need basic charging.
- Requires a smartphone and app for advanced features.
Setup, Compatibility & Care
Setup:
- Ensure the charger is connected to a mains power source.
- Connect the polarity-free clamps to your motorcycle's battery terminals. The clamps are designed to be connected correctly regardless of which terminal they are attached to, and they are spark-free.
- Download and install the CTEK App on your smartphone.
- Follow the in-app instructions to connect the CS One GEN 2 to your Wi-Fi network and pair it with your device via Bluetooth.
Compatibility:
- Compatible with all types of 12V lead-acid batteries (WET, MF, AGM, GEL).
- Compatible with lithium (LiFePO₄) batteries.
- Suitable for motorcycles and other small vehicles with 12V systems.
Care:
- Keep the charger and clamps clean and dry. Wipe with a soft, damp cloth if necessary. Do not use solvents or abrasive cleaners.
- Ensure ventilation around the charger is not obstructed.
- Store the charger in a dry environment when not in use.