Bartoline Teak Oil Wood Furniture Sealer - 500mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Bartoline Teak Oil Wood Furniture Sealer is designed for homeowners and woodworkers looking to restore the natural luster and health of their hardwood furniture. It excels at replacing oils lost to weathering in both garden sets and interior pieces, though it requires meticulous preparation and proper disposal of application materials to ensure safety and longevity.
All features
| Model Part Number | TK4560 |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
Can I use this on softwoods?
This product is specifically formulated for hardwoods like Oak and Teak. It may not absorb correctly into softwoods.
How long should I wait between coats?
You should allow at least 24 hours between each application for the best results.
Is this safe for food-contact surfaces?
The product information does not specify food safety. It is recommended to use dedicated food-safe oils for kitchen countertops or cutting boards.
What should I do with my rags after I finish?
Wash them immediately with soapy water and dispose of them safely outside to prevent self-ignition.
Do I need to sand the furniture first?
Yes, removing existing finishes like paint or old stain with sandpaper is necessary for the oil to penetrate the wood grain.
Troubleshooting
The oil feels sticky after 24 hours.
You likely applied too much product. Wipe the surface with a cloth dampened with White Spirit to remove the excess.
The finish looks uneven or patchy.
The wood may have been improperly prepped. Lightly sand the area and apply an additional thin coat.
Pros and Cons
Pros
- Deeply penetrates dense hardwoods
- Restores original color and moisture balance
- Suitable for both indoor and outdoor furniture
- Easy-to-use spray application
Cons
- Requires careful preparation including sanding
- 24-hour drying time between coats
- Soiled cloths present a self-ignition fire hazard if not managed correctly
Setup, Compatibility & Care
Before starting, ensure the furniture is completely dry; moisture trapped under the oil can lead to poor adhesion. Use sandpaper to remove existing sealers, paints, or stains before initial application. Wipe the surface down with White Spirit to remove dust, grease, and grime. After application, cleaning is critical: wash all brushes and cloths with White Spirit immediately. To prevent fire risks, do not leave oily rags bunched up; wash them thoroughly with soapy water and dispose of them outside in a safe container.