Ring RBC350A Battery Cable - 35mm Square - 4.5 Meters - 450 Ah
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Ring RBC350A Battery Cable is designed for professionals needing reliable power for trucks and commercial vehicles up to 7.0 L. Its key benefit is the fully insulated, high-strength construction ensuring added safety during use. A potential consideration is its specific application for larger vehicles, meaning it may be overkill for smaller cars. This product offers a robust solution for jump-starting or providing auxiliary power, featuring substantial cable gauge and amperage capacity.
All features
| Model Part Number | RBC350A |
|---|---|
| Brand | Ring |
Extended Product Information
FAQs
What size engines are these cables suitable for?
The Ring RBC350A cables are designed for commercial vehicles and trucks with engines up to 7.0 Liters.
What is the amperage rating of these battery cables?
These cables have an amperage rating of 450 Amps.
How long are the cables?
The cable length is 4.5 meters.
What is the cable cross-sectional area?
The cable section is 35 mm².
Are these cables safe for use on smaller cars?
While they can be used on smaller cars, they are specifically designed for larger engines and may be more cumbersome than necessary for typical passenger vehicles.
How should I store the battery cables?
The cables come with a sturdy nylon bag, which is ideal for keeping them organized, protected, and easy to transport.
What does 'fully insulated' mean for the jaws?
Fully insulated jaws mean that the gripping parts are covered with a protective material to prevent accidental contact with other metal parts, significantly reducing the risk of short circuits and electrical shock.
Can I leave these cables connected for extended periods?
No, battery cables are intended for temporary use, such as jump-starting. Do not leave them connected after the vehicle has started.
Troubleshooting
Vehicle does not start after connecting cables
Ensure the clamps are securely attached to clean battery terminals or ground points. Verify the donor vehicle's engine is running. Check that the cable connections are in the correct order (red to positive, black to negative/ground).
Sparks occur when connecting clamps
This can happen due to residual charge. Ensure the final black clamp is connected to a good ground point away from the battery. Double-check connections are firm and correct.
Cable feels warm during use
A slight warmth is normal during high-current transfer. However, if the cable becomes excessively hot, disconnect immediately. This could indicate a poor connection, a severely discharged battery, or a fault in one of the vehicles. Let the cable cool before re-attempting or investigating further.
Pros and Cons
Pros
- Enhanced safety due to fully insulated jaws.
- Durable construction for professional, heavy-duty use.
- Adequate cable length for maneuvering on larger vehicles.
- High amperage rating suitable for commercial vehicles.
- Convenient storage and transport with the included nylon bag.
Cons
- May be excessively large for smaller passenger vehicles.
- Requires careful handling due to high amperage.
- Primarily designed for commercial applications, not general consumer use.
Setup, Compatibility & Care
Setup:
- Ensure both vehicles are turned off and parked safely, with the parking brake engaged.
- Connect the red (+) clamp of the battery cable to the positive (+) terminal of the dead battery.
- Connect the other red (+) clamp to the positive (+) terminal of the donor battery.
- Connect the black (-) clamp of the battery cable to the negative (-) terminal of the donor battery.
- Connect the final black (-) clamp to a bare metal grounding point on the engine block or chassis of the vehicle with the dead battery, away from the battery itself.
- Start the engine of the donor vehicle and let it run for a few minutes.
- Attempt to start the vehicle with the dead battery.
- Once the vehicle starts, carefully remove the cables in the reverse order: black from ground, black from donor battery, red from donor battery, red from dead battery.
Compatibility:
This cable is designed for trucks and commercial vehicles up to 7.0 L displacement. It is suitable for jump-starting vehicles with 12V battery systems. Using it on smaller vehicles is possible but may be unnecessarily bulky.
Care:
- After each use, wipe the clamps and cables clean with a dry cloth.
- Store the cables in the provided nylon bag to protect them from dirt, moisture, and damage.
- Inspect the cables and clamps regularly for any signs of wear, cracks, or corrosion. Replace if damaged.
- Keep the clamps and terminals clean for optimal conductivity.