Silca Synerg-E Lube - 2oz
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Silca Synerg-E Lube is specifically engineered for e-bike owners looking to maximize the longevity of their drivetrain components under high-torque conditions. By utilizing advanced Tungsten Tribofilm Technology and a high-viscosity formula, it provides exceptional wear resistance for chains and cassettes, though users should note it sacrifices a slight amount of pedaling efficiency compared to standard non-e-bike lubricants.
All features
| Model Part Number | SIAMAC035ASY0100 |
|---|---|
| Brand | Silca |
Extended Product Information
FAQs
Can I use Synerg-E on a regular acoustic bicycle?
Yes, it is compatible with all bike chains, though its high-viscosity formula is specifically optimized for the higher torque and wear pressures of e-bikes.
How often should I re-apply the lube?
While the bottle is rated for up to 10,000 miles, re-application frequency depends on riding conditions. Listen for drivetrain noise; if the chain starts to sound dry, clean it and apply a fresh coat.
Is this a wax or an oil-based lubricant?
Synerg-E is a high-viscosity, oil-based synthetic lubricant enriched with Tungsten Tribofilm Technology.
Does this lube contain harmful PFAS chemicals?
No, Synerg-E is completely free of PFAS and other fluorinated chemicals.
Will this lube wash off in the rain?
It is designed as an all-conditions lubricant with high film strength, meaning it remains effective even during rides in wet or rainy environments.
Troubleshooting
Excessive black gunk buildup on chain
You likely applied too much lubricant; after applying, ensure you wipe the exterior of the chain thoroughly with a rag until it feels dry to the touch.
Drivetrain feels sluggish or sticky
The chain may be contaminated with old grease or debris; perform a deep clean using a dedicated degreaser before re-applying the lube.
Pros and Cons
Pros
- Significantly extends the life of expensive e-bike chains and cassettes
- Extremely quiet drivetrain operation
- Highly durable; lasts for many miles per application
- Environmentally friendly chemical composition
- Designed specifically for high-torque e-bike motors
Cons
- Slightly higher rolling resistance (approx. 1 watt) compared to the standard Synergetic lube
- 2oz bottle size may require frequent rebuying for high-mileage commuters
- Requires proper chain cleaning before initial application for best results
Setup, Compatibility & Care
To achieve the best results with Synerg-E, begin with a clean, degreased drivetrain to ensure the lubricant can bond correctly with the metal surfaces. Apply one drop of lubricant to the inside of each chain link roller. After application, back-pedal the drivetrain for several rotations to allow the lubricant to penetrate deep into the pins and rollers. Wipe away any excess oil from the outside plates with a clean rag to prevent dirt accumulation. As a high-viscosity product, it is most effective when applied at room temperature.