Laser Tools Alignment Pins for 7 Speed DSG Mechatronic Unit - 8733
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for automotive technicians working on specific Audi and Volkswagen models equipped with a 7-speed DSG mechatronic unit. The key benefit is ensuring precise alignment of the mechatronic unit during service, preventing costly errors. A caveat is the necessity of using this tool in conjunction with other specialized Laser Tools, as specified by OEM procedures. The Laser Tools 8733 alignment pins are designed to accurately hold the mechatronic unit in place for maintenance and repair on compatible vehicles.
All features
| Model Part Number | 8733 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What is the OEM equivalent part number for these alignment pins?
These alignment pins are equivalent to OEM tool T10406.
Which specific transmission type do these pins service?
These pins are designed exclusively for 7-speed DSG mechatronic units.
Do I need other tools to use the 8733 alignment pins?
Yes, for complete and correct usage, you will need Laser Assembly Lever (Part No. 5164), DSG setting Gauge Kit (Part No. 7914), and DSG Removal & Insertion Kit (Part No. 7918), in accordance with OEM instructions.
Can these pins be used on a 6-speed DSG transmission?
No, these alignment pins are specifically for 7-speed DSG mechatronic units only and are not compatible with 6-speed variants.
What happens if I don't use alignment pins when servicing the mechatronic unit?
Failure to use alignment pins can lead to improper seating of the mechatronic unit, potentially causing transmission shifting problems, internal damage, and costly repairs.
How should I clean and store these alignment pins?
Clean the pins with a soft, dry cloth after use and store them in a dry place to prevent corrosion and maintain their condition.
Are these tools suitable for DIY use?
These are specialized professional tools intended for use by trained automotive technicians following OEM procedures. Incorrect use can lead to transmission damage.
Troubleshooting
Pins do not insert easily
Ensure you are using the correct pins for the specific mechatronic unit and verify that no debris is present in the receiving holes. Double-check vehicle compatibility.
Mechatronic unit still misaligned after use
Confirm that all required supporting tools (e.g., assembly lever, gauge kit) are being used correctly and that the OEM procedure is being followed precisely. Check if the pins are fully seated.
Pins appear bent or damaged
Do not use damaged tools. Inspect the pins for any signs of deformation or wear. If damaged, replace the tool to ensure proper function and safety.
Pros and Cons
Pros
- Ensures accurate mechatronic unit alignment for proper transmission function.
- Direct replacement for OEM tool T10406.
- Covers a wide range of compatible Audi and Volkswagen vehicles.
- Facilitates correct reassembly, reducing the risk of transmission damage.
Cons
- Requires additional specialized tools (5164, 7914, 7918) for full functionality.
- Strictly for 7-speed DSG mechatronic units; not universally compatible.
- Requires adherence to OEM service procedures for correct usage.
Setup, Compatibility & Care
Compatibility:
This tool is specifically designed for 7-speed DSG mechatronic units in the following vehicles:
- Audi: A3 (2006 - 2013), R8 (2014 - 2020), RS3 (2017 - 2020), RS5 (2010 - 2020), S3 (2015 - 2020), S4 (2010 - 2020), S5 (2013 - 2020), S6 (2013 - 2020), TT (2004 - 2020).
- Volkswagen: EOS (2007 - 2025), Golf (2006 - 2020), Jetta (2005 - 2018), Passat (2009 - 2018).
Setup & Use:
- Refer to the vehicle's OEM service manual for specific instructions.
- Ensure the vehicle is safely supported and necessary components are removed to access the mechatronic unit.
- Use the Laser Tools 8733 alignment pins to correctly position and secure the mechatronic unit during installation or removal, in conjunction with Laser Assembly Lever (Part No. 5164), DSG setting Gauge Kit (Part No. 7914), and DSG Removal & Insertion Kit (Part No. 7918) as required.
- Always follow OEM procedures to avoid damage.
Care:
- Clean the pins with a soft, dry cloth after each use.
- Store in a dry, protected environment to prevent corrosion.
- Inspect for any damage or wear before each use.